Page 1
SUNWARD
®
Features
Acrylic
•
TM heated lumbar support with three temperature
Bask
•
settings
120 BubbleMassage
•
Blower motor with 300 W heater and electronic user
•
control
Molded lumbar support and armrests for comfort
•
Drop-in installation
•
Reversible drain
•
72″ (1829 mm) x 42″ (1067 mm) x 21″ (533 mm)
•
TM airjets
Codes/Standards Applicable
Specified model meets or exceeds the following:
ASME A112.19.7/CSA B45.10
•
ASTM E162
•
ASTM E662
•
CSA B45.5/IAPMO Z124
•
UL 1795
•
Specified Model
6’ BUBBLEMASSAGETM BATH WITH
BASKTM
K-1164-GW
Colors/Finishes
0: White
•
Other: Refer to Price Book for additional colors/finishes
•
CP: Polished Chrome
•
PB: Vibrant®Polished Brass
•
Model Description Colors/Finishes
K-1164-GW 6’ Bubblemassage bath with Bask ❑ 0 ❑ Other_____
Recommended Accessories
K-11677 Swiftflo
Optional Accessories
K-577 Under-mount kit ❑ NA
TM adjustable trip lever drain ❑ CP ❑ PB
Product Specification
The acrylic bath with airjets shall be 72″ (1829 mm) in length, 42″ (1067 mm) in width, and 21″ (533 mm) in height. Product shall
feature Bask heated surface with three temperature settings. Bath shall have 120 BubbleMassage airjets and a blower motor
with 300 W heater and electronic user control. Bath shall have molded lumbar supports and armrests for comfort. Bath shall be
for drop-in installation. Bath shall have reversible drain. Bath shall be Kohler Model K-1164-GW-____.
Page 1 of 2
1201698-4-
USA/Canada: 1-800-4KOHLER
A
(1-800-456-4537)
www.kohler.com
Page 2
SUNWARD
®
Technical Information
Required Electrical Service
Fixture*:
Bathing well;
Basin area,
bottom
Basin area,
top
Weight 118 lbs (53.5 kg)
To overflow:
Water depth 15″ (381 mm)
Capacity 75 gal (284.1 L)
* Approximate measurements for comparison only.
Included components:
Cut-out template 1042557-7
Blower motor 120 60 10
Heated surface 120 60 0.5
55-1/4″ (1403 mm) x 23-1/2″ (597 mm)
64-1/2″ (1638 mm) x 32″ (813 mm)
VHzA
2-3/4" (70 mm)
Dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI) or Residual
Current Device (RCD):
Blower motor/Heated surface 120 V, 15 A, 60 Hz
Installation Notes
Install this product according to the installation guide.
Floor support under bath must provide for a minimum of 37
lbs/square foot (178 kg/square meter) loading.
Locate a GFCI-protected 120 V, 15A, grounded duplex
electrical outlet within 24″ (610 mm) of the blower motor.
No change in measurements if connected with
drain illustrated. (K-11677)
Recommended faucet area
21"
(533 mm)
11-1/16"
(281 mm)
72" (1829 mm)
3-1/2"
(89 mm)
3" (76 mm)
2-7/8"
(73 mm)
Lumbar
Angle 31˚
1" (25 mm)
Product Diagram
SUNWARD®6’ BUBBLEMASSAGETM BATH WITH BASKTM
Page2of2
1201698-4-
A
Blower/Control Access
30" (762 mm) W x
15" (381 mm) H Min
1-1/2"
(38 mm)
21"
(533 mm)
19-1/2"
(495 mm)
1-1/2"
(38 mm)
Drop-In Rim Detail
42" (1067 mm)
1-1/2" Bath Drain
Loading...