Page 1
5' VibrAcoustic® Bath with Bask™ Heated Surface
Features
•
VibrAcoustic calms and soothes with sound vibration technology.
•
Six concealed speakers send sound waves through the water
to gently massage the body.
•
Four original instrumental compositions offer different levels of
relaxation.
•
Plug in your smart phone, tablet, or MP3 player via auxiliary-in
cable. Add your own receiver to stream wirelessly via
Bluetooth®.
•
Customize your experience with the high-resolution color touch
screen.
•
Fully adjustable volume above and below the water.
•
Functions as a hydrotherapy bath when full of water and a
stereo system when empty.
•
Bask™ heated surface creates spa-like relaxation with soothing
warmth on your back and neck.
•
Three heat settings allow you to customize the surface
temperature.
•
Clearflo slotted overflow for deep soaking.
•
Includes 25 feet of wiring and amplifier.
•
*The BLUETOOTH® word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc. and any use of such
marks by Kohler Co. is under license. Other trademarks and
trade names are those of their respective owners.
Material
•
Acrylic
Hydrotherapy
•
VibrAcoustic
Underscore
®
K-1167-VBW
Codes/Standards
CSA B45.5/IAPMO Z124
UL 1795
CSA C22.2 No. 218.2
ADA
ICC/ANSI A117.1
KOHLER® One-Year Limited Warranty
KOHLER® Electronic Faucets, Valves,
and Controls - Five-Year Limited
Warranty
See website for detailed warranty information.
Installation
•
Drop-in or under-mount.
•
Requires 110V electrical service.
USA/Canada: 1-800-4KOHLER (1-800-456-4537)
www.kohler.com
2-18-2015 00:54
Available Color/Finishes
Color tiles intended for reference only.
DescriptionCodeColor
White0
Biscuit96
Almond47
DuneNY
Ice™ Grey95
SandbarG9
Mexican Sand™33
CashmereK4
Thunder™ Grey58
Black Black™7
Page 2
1"
Underscore
®
5' VibrAcoustic® Bath with Bask™ Heated Surface
K-1167-VBW
Required Electrical Service
One dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI) or Residual Current Device
(RCD).
120 V, 15 A, 50/60 HzAmplifier, Heater:
Technical Information
All product dimensions are nominal.
Drop-in/UndermountInstallation:
ReversibleDrain location:
42-3/8" x 20" (1076 mm x 508 mm)Basin area, bottom:
54-3/8" x 24-5/16" (1381 mm x 618 mm)Basin area, top:
80 lbs (36.3 kg)Weight:
50 lbs/ft² (244.1 kg/m²)Minimum floor load:
15-1/16" (383 mm)Water depth:
59.8 gal (226.4 L)Water capacity:
Cutout:
Electrical rating:
Drop-in, 59-1/2" x 28-1/2" (1511 mm x
724 mm)
Amplifier: 120 V, 50/60 Hz, 15 W
Heater: 120 V, 1.1 A, 60 Hz, 65 W
Notes
Install this product according to the installation
guide. Ensure that the bath, user interface,
amplifier, and transducers are functional before
completing the installation.
Control amplifier fits 16" (406 mm) center studs.
25’ (7.6 m) cables are included.
Locate the bath within 24" (610 mm) of a
GFCI-protected 120 V, 15 A grounded electrical
outlet. A second grounded outlet within the wall
framing must be within 24" (610 mm) of the
planned control amplifier. One electrical service
may be used for the entire bath and related
electrical components.
Hot water supply should be 70% of capacity or
greater. Installations will vary.
ADA compliant when installed to the specific
requirements of these regulations.
USA/Canada: 1-800-4KOHLER (1-800-456-4537)
www.kohler.com
2-18-2015 00:54
Loading...