Page 1
Bellwether
Features
•
6 hydromassage jets can be individually adjusted for water
flow and direction.
•
Variable-speed pump for adjusting hydromassage intensity.
•
Built-in heater.
•
Electronic keypad.
•
Optional remote control.
•
Clean lines and streamlined style add contemporary appeal
to any bathroom.
•
16-1/2" apron height for easy entry and exit.
•
Safeguard® slip-resistant surface on bath floor.
•
Wide ledges for extra storage space.
Material
•
KOHLER® enameled cast iron.
Hydrotherapy
•
Whirlpool.
Installation
•
Right drain.
•
Alcove.
Required Products/Accessories
K-9696 Whirlpool 6-Jet Trim Kit
Recommended Products/Accessories
K-7259 Brass toe tap bath drain
K-9497 2-1/2" Keypad Trim
Codes/Standards
ASME A112.19.1/CSA B45.2
ASME A112.19.7/CSA B45.10
ASTM F462
UL 1795
CSA C22.2 No. 218.2
ADA
ICC/ANSI A117.1
KOHLER® Enameled Cast Iron Bath
and Shower Base Lifetime Limited
WarrantyKOHLER® Hydrotherapy
Components Five-Year Limited
Warranty
See website for detailed warranty information.
®
66" x 32" alcove whirlpool
K-860-H2
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
8-7-2021 05:25 - US/CA
Page 2
Bellwether
32"
(813 mm)
1/2"
(13 mm)
No change in measurement if connected with
drain illustrated. (K-7259)
1-1/2" Bath Drain
16-1/2"
(419 mm)
Rim Flange Detail
5/8"
(16 mm)
1/4"
(6 mm)
1/2"
(13 mm)
2-7/8"
(73 mm)
1/4" (6 mm)
3-1/4"
(83 mm)
16"
(406 mm)
66" (1676 mm)
9"
(229 mm)
Lumbar
Angle 39°
Pump Access
34" (864 mm) W x
15" (381 mm) H Min
2-5/8"
(67 mm)
17"
(432 mm)
Required Electrical Service
One dedicated circuit required, protected with Class A GroundFault Circuit-Interrupter (GFCI). Outside North America, this
device may be known as a Residual Current Device (RCD).
Pump, Heater: 240 V, 20 A, 50/60 Hz
Technical Information
All product dimensions are nominal.
Installation: Three-wall alcove
Drain location: Right
Basin area, bottom: 50-3/4" x 20-5/16" (1289 mm x 516 mm)
Basin area, top: 58-7/16" x 22-5/8" (1484 mm x 575 mm)
Weight: 470 lbs (213.2 kg)
Minimum floor load: 61.6 lbs/ft² (300.8 kg/m²)
Water depth: 11-11/16" (297 mm)
Water capacity: 49 gal (185.5 L)
Electrical component
rating:
Pump: 240 V, 11 A, 50/60 Hz
Heater: 240 V, 6 A, 1500 W
Pump speed: Variable
Notes
Measure your actual product for rough-in
details.
Install this product according to the installation
instructions.
The hot water supply should be 70% of the
capacity of the bath or greater. Installations will
vary.
Cast iron whirlpools are extremely heavy,
making some drop-in installations difficult.
Splitting the deck/surround is recommended if
installing into a deck.
ADA compliant when installed to the specific
requirements of these regulations.
®
66" x 32" alcove whirlpool
K-860-H2
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
8-7-2021 05:25 - US/CA
Loading...