Page 1
MEMOIRS
®
Features
Acrylic
•
TM heated lumbar support with three temperature
Bask
•
settings
Textured bottom surface
•
Drop-in installation
•
66″ (1676 mm) x 42″ (1067 mm) x 22″ (559 mm)
•
Codes/Standards Applicable
Specified model meets or exceeds the following:
CSA B45.5/IAPMO Z124
•
UL 1795
•
ASTM E162
•
ASTM E662
•
Specified Model
5.5’ DROP-IN BATH WITH BASKTM
HEATED SURFACE
K-1169-W1
Colors/Finishes
0: White
•
Other: Refer to Price Book for additional colors/finishes
•
Accessories
0: White
•
CP: Polished Chrome
•
PB: Vibrant®Polished Brass
•
Other: Refer to Price Book for additional colors/finishes
•
Model Description Colors/Finishes
K-1169-W1 5.5’ Drop-in bath with Bask heated surface ❑ 0 ❑ Other_____
Recommended Accessories
K-7161-AF Pop-up drain OR ❑ PB ❑ CP ❑ Other_____
K-7213 Cable drain with PVC tubing OR ❑ CP ❑ Other_____
K-7214 Cable drain without PVC tubing ❑ CP ❑ Other_____
Optional Accessories
K-1491 Pillow ❑ 0 ❑ Other_____
K-1601 Footstop ❑ 0 ❑ Other_____
Product Specification
The acrylic drop-in bath shall be 66″ (1676 mm) in length, 42″ (1067 mm) in width, and 22″ (559 mm) in height. Bath shall feature
textured bottom surface. Bath shall feature Bask heated lumbar support with three temperature settings. Bath shall be Kohler
Model K-1169-W1-______.
Page 1 of 2
1201652-4-
B
USA/Canada: 1-800-4KOHLER
(1-800-456-4537)
www.kohler.com
Page 2
MEMOIRS
®
Technical Information
Fixture*:
Basin area:
Bathing well 42″ (1067 mm) x 27″ (686 mm)
Top area 54″ (1372 mm) x 30″ (762 mm)
To overflow:
Water depth 16″ (406 mm)
Capacity 81 gal (306.6 L)
Weight 80 lbs (36.3 kg)
* Approximate measurements for comparison only.
Drop-in
cutout
Heater: W V HZ A
64-1/2″ (1638 mm) x 40-1/2″ (1029 mm)
65 120 60 .5
Installation Notes
Install this product according to the installation guide.
Floor support under the bath must provide for a minimum of
40 lbs (196 kg).
Hot water supply should be 70% of capacity or greater.
Installations will vary.
If installing a rim-mount faucet, make sure there is no
interference with drain overflow before drilling any holes.
Consult local and national codes for minimum air gap
requirements if installing a spout on the faucet deck.
This bath is designed for drop-in installation only. It is not
suited for use in a three-wall alcove with an overhead shower.
Locate a GFCI-protected 120 V, 15 A, grounded electrical
outlet within 24″ (610 mm) of the bath junction box.
40″ (1016 mm) cable is included.
No change in measurements if connected with drain
illustrated. (K-7161-AF)
Access Panel
20" (508 mm) L x 15" (381 mm) H Min
42" (1067 mm)
2-7/8"
(73 mm)
3"
(76 mm)
33" (838 mm)
66" (1676 mm)
Lumbar
Angle
25˚
1-1/2" Bath Drain
3" (76 mm)
1-1/16" (27 mm)
11-3/4"
(298 mm)
20-1/8"
(511 mm)
22"
(559 mm)
Product Diagram
MEMOIRS®5.5’ DROP-IN BATH WITH BASKTM HEATED SURFACE
Page2of2
1201652-4-
B
Loading...