Page 1
EXPANSE
®
Features
Acrylic
•
TM heated lumbar support with three temperature
Bask
•
settings
Curved integral apron
•
Textured bottom surface
•
Integral tile flange
•
Left or right drain
•
Install footprint: 38″ (965 mm) width at center of
•
apron
60″ (1524 mm) x 32″ (813 mm) x 17″ (432 mm)
•
Codes/Standards Applicable
Specified model meets or exceeds the following:
CSA B45.5/IAPMO Z124
•
ASTM E162
•
ASTM E662
•
UL 1795
•
Specified Model
5’ CURVED APRON BATH WITH
BASKTM HEATED SURFACE
K-1100-LAW
ALSO K-1100-RAW
Colors/Finishes
0: White
•
Other: Refer to Price Book for additional colors/finishes
•
Accessories
CP: Polished Chrome
•
Other: Refer to Price Book for additional colors/finishes
•
Model Description Colors/Finishes
K-1100-LAW 5’ Curved apron bath with Bask heated surface – left drain ❑ 0 ❑ Other_____
K-1100-RAW 5’ Curved apron bath with Bask heated surface – right drain ❑ 0 ❑ Other_____
Recommended Accessories
K-7161 Clearflo 1-1/2″ adjustable pop-up bath drain ❑ CP ❑ Other_____
K-7213 Clearflo cable bath drain with PVC tubing ❑ CP ❑ Other_____
K-7214 Clearflo cable bath drain without PVC tubing ❑ CP ❑ Other_____
Product Specification
The curved apron bath shall be made of acrylic. Bath shall be 60″ (1524 mm) in length, 32″ (813 mm) in width, and 17″ (432
mm) in height. Bath shall have install footprint of 38″ (965 mm) width at center of apron. Bath shall feature a curved integral
apron, integral tile flange, and textured bottom surface. Bath shall feature Bask heated lumbar support with three temperature
settings. Bath shall be available with left or right drain. Bath shall be Kohler Model K-1100-____-____.
Page 1 of 2
1201643-4-
B
USA/Canada: 1-800-4KOHLER
(1-800-456-4537)
www.kohler.com
Page 2
EXPANSE
®
Technical Information
Fixture*:
Bathing well:
Basin area, top 54″ (1372 mm) x 31″ (787 mm)
Basin area,
bottom
Weight 78 lbs (35.4 kg)
To overflow:
Water depth 12-5/8″ (321 mm)
Capacity 60 gal (227.1 L)
* Approximate measurements for comparison only.
Heater: W V HZ A
45-11/16″ (1160 mm) x 27-5/8″ (702
mm)
65 120 60 .5
Installation Notes
Install this product according to the installation guide.
Floor support under the bath must provide for minimum of 38
lbs/square foot (186 kg/square meter) loading.
The hot water supply should be 70% of the capacity of the
bath or greater. Installations will vary.
Locate a GFCI-protected 120 V, 15 A, grounded electrical
outlet within 24″ (610 mm) of the bath junction box.
40″ (1016 mm) cable is included.
17-13/16"
(452 mm)
32"
(813 mm)
2-1/2"
(64 mm)
1-1/2" Bath Drain
9-3/4"
(248 mm)
2-7/8" (73 mm)
3" (76 mm)
60" (1524 mm)
Lumbar
Angle 25˚
1/2" (13 mm)
No change in measurements if connected
with drain illustrated. (K-7213)
38"
(965 mm)
Access Panel
20" (508 mm) L x
15" (381 mm) H Min
18-1/4"
(464 mm)
1-1/4"
(32 mm)
3/8"
(10 mm) R.
Integral Flange Detail
1-1/4"
(32 mm)
17"
(432 mm)
Product Diagram
EXPANSE®5’ CURVED APRON BATH WITH BASKTM HEATED SURFACE
Page2of2
1201643-4-
B
Loading...