Page 1
MARIPOSATM
Features
Acrylic
•
TM heated lumbar support with three temperature
Bask
•
settings
Textured bottom surface
•
Integral apron with removable access panel
•
Integral tile flange
•
3-wall alcove installation
•
Left or right drain
•
66″ (1676 mm) x 36″ (914 mm) x 20″ (508 mm)
•
Codes/Standards Applicable
Specified model meets or exceeds the following:
ASTM E162
•
ASTM E662
•
CSA B45.5/IAPMO Z124
•
UL 1795
•
Specified Model
5.5’ APRON BATH WITH BASKTM
HEATED SURFACE
K-1229-LAW
ALSO K-1229-RAW
Colors/Finishes
0: White
•
Other: Refer to Price Book for additional colors/finishes
•
Accessories
CP: Polished Chrome
•
PB: Vibrant®Polished Brass
•
Other: Refer to Price Book for additional colors/finishes
•
Model Description Colors/Finishes
K-1229-LAW 5.5’ Apron bath with Bask heated surface – left drain ❑ 0 ❑ Other_____
K-1229-RAW 5.5’ Apron bath with Bask heated surface – right drain ❑ 0 ❑ Other_____
Recommended Accessories
K-7161-AF Drain ❑ CP ❑ PB ❑ Other_____
Product Specification
The acrylic bath shall be 66″ (1676 mm) in length, 36″ (914 mm) in width, and 20″ (508 mm) in height. Bath shall have textured
bottom surface. Bath shall have an integral apron with removable access panel and integral tile flange. Bath shall feature Bask
heated lumbar support with three temperature settings. Bath shall be for 3-wall alcove installation. Bath shall be available with
left or right drain. Bath shall be Kohler Model K-1229-___-____.
Page 1 of 2
1201646-4-
B
USA/Canada: 1-800-4KOHLER
(1-800-456-4537)
www.kohler.com
Page 2
MARIPOSATM
Technical Information
Fixture*:
Bathing well:
Basin area, top 48″ (1219 mm) x 24″ (610 mm)
Basin area, bottom 59″ (1499 mm) x 30″ (762 mm)
Weight 65 lbs (30 kg)
To overflow:
Water depth 14″ (356 mm)
Capacity 67 gal (254 L)
* Approximate measurements for comparison only.
Drop-in cutout 58″ (1473 mm) x 34″ (864 mm)
Heater: W V HZ A
65 120 60 .5
Installation Notes
Install this product according to the installation guide.
NOTE: Unless otherwise specified, floor support under the
bath must provide for a minimum of 39 lbs/square foot (193
kg/square meter) loading.
Locate a GFCI-protected 120 V, 15 A, grounded electrical
outlet within 24″ (610 mm) of the bath junction box.
40″ (1016 mm) cable is included.
18"
(457 mm)
3-1/2"
(89 mm)
8-11/16"
(221 mm)
3"
(76 mm)
66" (1676 mm)
2-7/8"
1" (25 mm)
(73 mm)
Lumbar
Angle 38˚
No change in measurements if connected with
drain illustrated. (K-7161-AF)
Recommended faucet area.
1-1/4"
(32 mm)
1/2" (13 mm)
R. Max
Integral
Flange Detail
36" (914 mm)
20"
(508 mm)
1-1/2" Bath Drain
Product Diagram
MARIPOSATM 5.5’ APRON BATH WITH BASKTM HEATED SURFACE
Page2of2
1201646-4-
B
Loading...