Page 1
5.5' VibrAcoustic® Bath with Bask™ Heated Surface
Features
•
VibrAcoustic technology emits sound waves and offers a
surround sound experience.
•
Six transducers and a control amplifier with 25’ (7.6 m) of wiring.
•
User-friendly high-resolution color touch screen in polished
chrome.
•
Bask™ heated surface with three temperature settings.
•
Molded lumbar support and armrests for comfort
•
Textured bottom surface.
•
Reversible drain.
Material
•
Acrylic
Installation
•
Drop-in installation.
Codes/Standards
CSA B45.5/IAPMO Z124
ASTM E162
ASTM E662
UL 1795
CSA C22.2 No. 218.2
Mariposa
K-1224-VBW
®
KOHLER® One-Year Limited Warranty
See website for detailed warranty information.
Available Color/Finishes
Color tiles intended for reference only.
DescriptionCodeColor
White0
Biscuit96
Almond47
DuneNY
Ice™ Grey95
SandbarG9
USA/Canada: 1-800-4KOHLER (1-800-456-4537)
www.kohler.com
2-18-2015 01:47
Page 2
1-1/2"
Mariposa
®
5.5' VibrAcoustic® Bath with Bask™ Heated Surface
K-1224-VBW
Required Electrical Service
One dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI) or Residual Current Device
(RCD).
120 V, 15 A, 50/60 HzAmplifier, Heater:
Technical Information
All product dimensions are nominal.
Drop-inInstallation:
ReversibleDrain location:
48" x 24" (1219 mm x 610 mm)Basin area, bottom:
59" x 30" (1499 mm x 762 mm)Basin area, top:
81 lbs (36.7 kg)Weight:
40.2 lbs/ft² (196.3 kg/m²)Minimum floor load:
14" (356 mm)Water depth:
67 gal (253.6 L)Water capacity:
Drop-in, 64" x 34" (1626 mm x 864 mm)Cutout:
Electrical rating:
Amplifier: 120 V, 50/60 Hz, 15 W
Heater: 120 V, 1.1 A, 60 Hz, 65 W
Notes
Install this product according to the installation
guide. Ensure that the interface, amplifier, and
transducers are functional before completing the
installation.
Control amplifier fits 16" (406 mm) center studs.
25’ (7.6 m) cables are included.
Locate the bath within 24" (610 mm) of a
GFCI-protected 120 V, 15 A grounded electrical
outlet. A second grounded outlet within the wall
framing must be within 24" (610 mm) of the
planned control amplifier. One electrical service
may be used for the entire bath and related
electrical components.
If installing a rim-mount faucet, make sure there
is no interference with drain overflow before
drilling any holes. Consult local and national
codes for minimum air gap requirements if
installing a spout on the faucet deck.
The apron must be installed before the finished
floor and wall materials are installed.
USA/Canada: 1-800-4KOHLER (1-800-456-4537)
www.kohler.com
2-18-2015 01:47
Loading...