Page 1
CAXTON
®
Features
Vitreous china
•
Under-mount
•
Available with KOHLER Artist Editions designs
•
Without overflow
•
Includes 1193643 clamp assembly
•
17″ (432 mm) x 14″ (356 mm)
•
Codes/Standards Applicable
Specified model meets or exceeds the following:
ASME A112.19.2/CSA B45.1
•
ICC/ANSI A117.1
•
ADA
•
Specified Model
UNDER-MOUNT BATHROOM SINK
K-2205
ALSO K-14193, K-14195, K-14218
Colors/Finishes
0: White
•
Other: Refer to Price Book for additional colors/finishes
•
Accessories
CP: Polished Chrome
•
Other: Refer to Price Book for additional colors/finishes
•
Model Description Colors/Finishes
K-2205 Under-mount bathroom sink ❑ 0 ❑ Other_____
K-2205-G Under-mount bathroom sink with glazed underside ❑ 0 ❑ Other_____
K-14193 Under-mount bathroom sink – Artist Editions ❑ Other_____
K-14195 Under-mount bathroom sink – Artist Editions ❑ 0
K-14218 Under-mount bathroom sink – Artist Editions ❑ Other_____
K-14390 Under-mount bathroom sink – Artist Editions ❑ Other_____
Recommended Accessories
K-9018 P-Trap ❑ CP ❑ Other_____
Product Specification
The under-mount bathroom sink shall be made of vitreous china. Bathroom sink shall be 17″ (432 mm) in length, and 14″ (356
mm) in width. Bathroom sink shall include 1193643 clamp assembly. Bathroom sink shall be without overflow. Bathroom sink
shall be available with Artist Editions designs. Bathroom sink shall be Kohler Model K-_______-______ or K-2205-G-______.
Page 1 of 2
1000420-4-
M
USA/Canada: 1-800-4KOHLER
(1-800-456-4537)
www.kohler.com
Page 2
CAXTON
®
Technical Information
Fixture*:
Basin area 17″ (432 mm) x 14″ (356 mm)
Water depth 6-3/8″ (162 mm)
Drain hole Ø 1-3/4″ (44 mm)
*Approximate measurements for comparison only.
Cutout template 1151011-7
Included components:
Basin clamp assembly 1193643
Installation Notes
Install this product according to the installation guide.
NOTICE: Countertop manufacturer or cutter must use the
current product template available at www.kohler.com, or by
calling 1-800-4KOHLER. Kohler Co. is not responsible for
cutout errors when the incorrect cutout template is used.
Will comply with ADA when installed per section 606
Lavatories and Sinks of the 2010 ADA Standards for
Accessible Design.
16-1/8"
(410 mm)
14"
(356 mm)
13-7/8"
(352 mm)
3/8" Hot
C
of Fitting
L
19-1/4" (489 mm)
1-1/4" OD
3/8" Cold
4" (102 mm)
Standard Installation
2-1/2" (64 mm)
7"
(178 mm)
1-1/8" (29 mm)
7/16" (11 mm)
8-1/4"
(210 mm)
Ø 3/8"
(10 mm)
Sealant
4-1/2"
(114 mm)
34"
(864 mm)
Recommended ADA Installation
Marble
Installation
27"
(686 mm)
Min
5/8"
(16 mm)
Bathroom Sink
24" (610 mm)
8"
(203 mm)
Min
11" (279 mm)
9"
(229 mm)
Min
Sealant
Installation
Bathroom
Sink
Wood
CAXTON®UNDER-MOUNT BATHROOM SINK
Page2of2
1000420-4-
M
Product Diagram
Loading...