Page 1
Roughing-In
K-5872
RIVERBY
TOP-MOUNT/UNDER-MOUNT KITCHEN SINK
®
Product Information
Applicable product:
Top-mount kitchen sink - with one hole K-5872-1A1
Top-mount kitchen sink - with three holes K-5872-3A1
Top-mount kitchen sink - with four holes K-5872-4A1
Under-mount kitchen sink - with five
holes
Fixture*:
Bowl area 22-1/4″ (565 mm) x
15-13/16″ (402 mm)
Water depth 9″ (229 mm)
Drain hole Ø 3-7/8″ (98 mm)
Faucet holes:
Top-mount models Ø 1-3/8″ (35 mm)
Under-mount model Ø 2-3/8″ (60 mm)
* Approximate measurements for comparison only.
Included components:
Under-mount sink kit 23″ (584 mm) 1054375
Bottom bowl rack K-6238
Cutout template 1172565-7
K-5872-5UA1
Recommended accessories:
P-Trap K-9000
Optional accessories:
Utility rack with soaking cup K-6194
Colander with integral cutting board K-6239
Wood cutting board K-6246
Duostrainer
sink strainer K-8801
®
Installation Notes
Install this product according to the installation guide.
NOTICE: Countertop manufacturer or cutter must use the
cutout template provided with the product, or a current one
provided by Kohler Co. (call 1-800-4-KOHLER). Kohler Co. is
not responsible for cutout errors when the incorrect cutout
template is used.
IMPORTANT! Use of the colander, wood cutting board, and
utility rack requires the ″reveal″ cutout option on the cutout
template.
Fixture conforms to ASME Standard A112.19.1/CSA B45.2. All
dimensions are nominal.
2-1/16"
(52 mm)
15"
(381 mm)
K-5872-3A1
4"
(102 mm)
25" (635 mm)
L
*
12-1/2"
(318 mm)
7-3/16"
(183 mm)
10"
(254 mm)
22"
(559 mm)
*Exterior Basin Dimensions
L (Length) = 22-15/16" (583 mm)
W (Width) = 17" (432 mm)
9-5/8"
(244 mm)
4"
(102 mm)
1-13/16"
(46 mm)
K-5872-5UA1
12-1/2"
(318 mm)
4-1/2"
(114 mm)
K-5872-1A1
K-5872-4A1
12-1/2"
(318 mm)
4-5/16"
(110 mm)
W*
2-1/16"
(52 mm)
4-1/2"
(114 mm)
2-1/16"
(52 mm)
4"
(102 mm)
2-1/16"
(52 mm)
9/16"
(14 mm)
1-1/2" OD
RIVERBY®TOP-MOUNT/UNDER-MOUNT KITCHEN SINK
1176858-1-
B
Loading...