Page 1
WINDWARDTM
Features
Acrylic
•
Rectangular shape
•
Molded lumbar supports and armrests
•
Drop-in, 3-side integral flange
•
72” (1829 mm) x 42” (1067 mm) x 21″ (533 mm)
•
Codes/Standards Applicable
Specified model meets or exceeds the following:
CSA B45.5/IAPMO Z124
•
ASTM E162
•
ASTM E662
•
Specified Model
K-1115-L
ALSO K-1115-R
Colors/Finishes
0: White
•
Other: Refer to Price Book for additional colors/finishes
•
Accessories
CP: Polished Chrome
•
BATH
Model Description Colors/Finishes
K-1115-L Bath – drop-in, 3-side integral flange, left drain ❑ 0 ❑ Other_____
K-1115-R Bath – drop-in, 3-side integral flange, right drain ❑ 0 ❑ Other_____
Recommended Accessory
K-7166-AF Clearflo pop-up drain OR ❑ CP ❑ Other_____
K-11677 Swiftflo pop-up drain ❑ CP ❑ Other_____
Product Specification
The acrylic drop-in bath shall be 72” (1829 mm) in length, 42” (1067 mm) in width, and 21″ (533 mm) in height. Bath shall have
a 3-side integral flange for alcove installation. Bath shall have molded lumbar supports and armrests. Bath shall be available
with left or right drain. Bath shall be Kohler Model K-1115-___-___.
Page 1 of 2
1047227-4-
USA/Canada: 1-800-4KOHLER
D
(1-800-456-4537)
www.kohler.com
Page 2
WINDWARDTM
Technical Information
Fixture*:
Bathing well:
Basin area,
bottom
Basin area, top 64″ (1626 mm) x 32″ (813 mm)
Weight 100 lbs (45 kg)
To overflow:
Water depth 15″ (381 mm)
Capacity 78.5 gal (297 L)
* Approximate measurements for comparison only.
Drop-in cut-out
dimensions:
21"
(533 mm)
55″ (1397 mm) x 23-1/4″ (591 mm)
70-1/2″ (1791 mm) x 40-1/2″
(1029 mm)
Installation Notes
Install this product according to the installation guide.
Floor support under the bath must provide for a minimum of
38 lbs/square foot (182 kg/square meter) loading.
If installing a rim-mount faucet, make sure there is no
interference with the drain overflow before drilling any holes.
Consult local and national codes for minimum air gap
requirements if installing a spout on the faucet deck.
No change in measurements if connected with
drain illustrated. (K-11677)
Recommended faucet area
3-3/4"
(95 mm)
11-1/16"
(281 mm)
1-1/4"
(32 mm)
3-1/2"
(89 mm)
WINDWARDTM BATH
Page2of2
1047227-4-
D
72" (1829 mm)
3"
(76 mm)
2-7/8"
(73 mm)
19-1/2"
(495 mm)
3/8" (10 mm)
Product Diagram
1-1/4"
(32 mm)
21"
(533 mm)
1-1/2"
(38 mm)
Drop-In
Rim Detail
42" (1067 mm)
1-1/2" OD
1-1/4"
(32 mm)
Tile Flange
Detail
Loading...