Page 1
WINDWARDTM
Features
Acrylic
•
Rectangular shape
•
Molded lumbar supports and armrests
•
Drop-in, 3-side integral flange
•
60″ (1524 mm) x 42″ (1067 mm) x 21″ (533 mm)
•
Codes/Standards Applicable
Specified model meets or exceeds the following:
CSA B45.5/IAPMO Z124
•
ASTM E162
•
ASTM E662
•
Specified Model
BATH WITH INTEGRAL FLANGE
K-1113-L
ALSO K-1113-R
Colors/Finishes
0: White
•
Other: Refer to Price Book for additional colors/finishes
•
Accessories:
CP: Polished Chrome
•
Model Description Colors/Finishes
K-1113-L Drop-in, 3-side integral flange, left drain ❑ 0 ❑ Other_____
K-1113-R Drop-in, 3-side integral flange, right drain ❑ 0 ❑ Other_____
Recommended Accessory
K-11677 Drain OR ❑ CP ❑ Other_____
K-7166 Drain ❑ CP ❑ Other_____
Product Specification:
The rectangular shaped bath shall be 60” (1524 mm) in length, 42” (1067 mm) in width, and 21″ (533 mm) in height. Bath shall
be made of acrylic. Drop-in bath shall have a 3-side integral flange. Bath shall have molded lumbar supports and armrests. Bath
shall be Kohler Model K-1113-__-___.
Page 1 of 2
1047216-4-
USA/Canada: 1-800-4KOHLER
D
(1-800-456-4537)
www.kohler.com
Page 2
WINDWARDTM
Technical Information
Fixture*: basin area top area weight
Bathing well 43″ (1092
mm) x 20-1/2″
(521 mm)
water depth capacity
To overflow 15″ (381 mm) 57 gal (215.9 L)
* Approximate measurements for comparison only.
Drop-in cut-out dimensions:
58-1/2″ (1486 mm) x 40-1/2″ (1029 mm)
53-1/2″ (1359
mm) x 32-1/8″
(816 mm)
80 lbs
(36 kg)
Installation Notes
Install this product according to the installation guide.
Floor support under the bath must provide for a minimum of
33 lbs/square foot (162 kg/square meter) loading.
If installing a rim-mount faucet, make sure there is no
interference with the drain overflow before drilling any holes.
Consult local and national codes for minimum air gap
requirements if installing a spout on the faucet deck.
No change in measurements if connected
with drain illustrated. (K-11677)
21"
(533 mm)
3-1/8"
(79 mm)
3-1/2"
(89 mm)
10-13/16"
(275 mm)
1-1/4"
(32 mm)
3"
(76 mm)
60" (1524 mm)
2-7/8"
(73 mm)
3/8" (10 mm)
Recommended faucet area
1-1/4"
(32 mm)
Tile Flange
Detail
1-1/4"
(32 mm)
42" (1067 mm)
21"
(533 mm)
1-1/2"
(38 mm)
Drop-In
Rim Detail
1-1/2" OD
WINDWARDTM BATH WITH INTEGRAL FLANGE
Page2of2
1047216-4-
D
Product Diagram
Loading...