Page 1
WINDWARDTM
Features
Acrylic
•
Rectangular shape
•
Molded lumbar supports and armrests
•
Integral apron
•
Integral tile flange
•
72” (1829 mm) x 42” (1067 mm) x 21″ (533 mm)
•
Codes/Standards Applicable
Specified model meets or exceeds the following:
CSA B45.5/IAPMO Z124
•
ASTM E162
•
ASTM E662
•
Specified Model
BATH WITH INTEGRAL APRON
K-1115-LA
ALSO K-1115-RA
Colors/Finishes
0: White
•
Other: Refer to Price Book for additional colors/finishes
•
Accessories:
CP: Polished Chrome
•
Model Description Colors/Finishes
K-1115-LA Integral apron, left drain ❑ 0 ❑ Other_____
K-1115-RA Integral apron, right drain ❑ 0 ❑ Other_____
Recommended Accessory
K-7166 Adjustable pop-up drain – above or through-the-floor installation
OR
K-11677 Swiftflo pop-up drain ❑ CP ❑ Other_____
❑ CP ❑ Other_____
Product Specification:
The rectangular shaped bath shall be 72” (1829 mm) in length, 42” (1067 mm) in width, and 21″ (533 mm) in height. Bath shall
be made of acrylic. Bath may have an integral tile flange and integral apron with removable access panel. Bath shall have
molded lumbar supports and armrests. Bath shall be Kohler Model K-1115-____-____.
Page 1 of 2
1047228-4-
USA/Canada: 1-800-4KOHLER
D
(1-800-456-4537)
www.kohler.com
Page 2
WINDWARDTM
Technical Information
Fixture:* basin area top area weight
Bathing well 55-1/4″
(1403 mm) x
23-1/2″ (597
mm)
water depth capacity
To overflow 15″ (381
mm)
* Approximate measurements for comparison only.
21"
(533 mm)
64-1/2″
(1638 mm) x
32″ (813
mm)
78.5 gal
(297 L)
100 lbs
(45 kg)
Installation Notes
Install this product according to the installation guide.
Floor support under the bath must provide for a minimum of
37 lbs/square foot (181 kg/square meter) loading.
If installing a rim-mount faucet, make sure there is no
interference with the drain overflow before drilling any holes.
Consult local and national codes for minimum air gap
requirements if installing a spout on the faucet deck.
No change in measurements if connected with
drain illustrated. (K-11677)
Recommended faucet area
3-3/4"
(95 mm)
11-1/16"
(281 mm)
72" (1829 mm)
1-1/4"
(32 mm)
3-1/2"
(89 mm)
3"
(76 mm)
WINDWARDTM BATH WITH INTEGRAL APRON
Page2of2
1047228-4-
D
2-7/8"
(73 mm)
3/8" (10 mm)
Product Diagram
1-1/4"
(32 mm)
21"
(533 mm)
1-1/4"
(32 mm)
Tile Flange
Detail
42" (1067 mm)
1-1/2" OD
Loading...