PROFLEX®7236
Features
ExoCrylic
•
Drop-in installation
•
Pump with air switch and grounding-type plug-in cord
•
Six individually adjustable ProFlex
•
jets
Molded lumbar support and armrests for comfort
•
Left or right drain
•
Optional K-1283 removable apron
•
Optional K-9696 whirlpool trim kit in additional
•
finishes
Tile flange on three sides for alcove installation
•
[K-1157-L/-R]
72″ (1829 mm) x 36″ (914 mm) x 20-1/8″ (511 mm)
•
TM
hydro-massage
®
Codes/Standards Applicable
Specified model meets or exceeds the following:
ASME A112.19.7/CSA B45.10
•
CSA B45.5/IAPMO Z124
•
UL 1795
•
Specified Model
WHIRLPOOL BATH
K-1157
ALSO K-1157-L, K-1157-R
Colors/Finishes
0: White
•
Other: Refer to Price Book for additional colors/finishes
•
Accessories
0: White
•
CP: Polished Chrome
•
PB: Vibrant®Polished Brass
•
Other: Refer to Price Book for additional colors/finishes
•
Model Description Colors/Finishes
K-1157 Whirlpool bath – drop-in (shown) ❑ 0 ❑ Other_____
K-1157-L Whirlpool bath – left drain, tile flange ❑ 0 ❑ Other_____
K-1157-R Whirlpool bath – right drain, tile flange ❑ 0 ❑ Other_____
Recommended Accessories
K-11677 Adjustable trip lever bath drain ❑ CP ❑ PB
Optional Accessories
K-1283 Removable apron ❑ 0 ❑ Other_____
Product Specification
The ExoCrylic whirlpool bath shall be 72″ (1829 mm) in length, 36″ (914 mm) in width, and 20-1/8″ (511 mm) in height. Whirlpool
shall be drop-in [K-1157] or tile flange on three sides for alcove installation with a left or right drain [K-1157-L/-R]. Whirlpool shall
have six individually adjustable ProFlex hydro-massage jets, and pump with air switch and grounding-type plug-in cord.
Whirlpool shall have molded lumbar support and armrests for comfort. Whirlpool shall feature optional K-1283 removable apron
and K-9696 whirlpool trim kit in additional finishes. Whirlpool bath shall be Kohler Model K-1157-______ or
K-1157-_____-_____.
Page 1 of 2
1012987-4-
F
USA/Canada: 1-800-4KOHLER
(1-800-456-4537)
www.kohler.com
PROFLEX®7236
Optional Accessories
K-9696 Jet trim kit (metal finishes) ❑ CP ❑ PB ❑ Other_____
Technical Information
Fixture*:
Bathing well:
Basin area, bottom 55″ (1397 mm) x 21″ (533 mm)
Basin area, top 65″ (1651 mm) x 26″ (660 mm)
Weight 66 lbs (29.9 kg)
To overflow:
Water depth 15″ (381 mm)
Capacity 72 gal (272.5 L)
* Approximate measurements for comparison only.
Drop-in
cutout
Pump: V Hz A
1-speed 120 60 7.5
18"
(457 mm)
70-1/2″ (1791 mm) x 34-1/2″ (876 mm)
Required Electrical Service
Dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI):
Pump/control 120 V, 15 A, 60 Hz
Locate the outlet behind the whirlpool and within 24″
(610 mm) of the pump.
Installation Notes
Install this product according to the installation guide.
Floor support under whirlpool must provide for a minimum of
38 lbs/square foot (188 kg/square meter) loading.
The apron must be installed before the finished floor and wall
materials are installed.
No change in measurements if connected with drain
illustrated. (K-11677)
1-1/4"
(32 mm)
1-1/2"
(38 mm)
1"
(25 mm)
8-1/2"
(216 mm)
2-1/2"
72" (1829 mm)
(64 mm)
3" (76 mm)
PROFLEX®7236 WHIRLPOOL BATH
Page2of2
1012987-4-
F
2-7/8" (73 mm)
1/4" (6 mm)
Product Diagram
Tile Flange
Detail
Pump/Control Access
(If Apron Is Not Used)
20" (508 mm) W x 15" (381 mm) H
Lumbar
Angle 34˚
20-1/8"
(511 mm)
18-5/8"
(473 mm)
1-1/2" Bath Drain
Drop-in
Rim Detail
36" (914 mm)
Loading...