Page 1
ARCHERTM
Features
Acrylic
•
8 color-matched Kohler hydro-massage jets
•
Pump with air switch and grounding-type plug-in cord
•
Slotted overflow for maximum bathing depth
•
Low threshold height
•
Integral lumbar support
•
Armrests
•
72″ (1829 mm) x 36″ (914 mm) x 19″ (483 mm)
•
Codes/Standards Applicable
Specified model meets or exceeds the following:
ADA
•
CSA B45.5/IAPMO Z124
•
ICC/ANSI A117.1
•
ASME A112.19.7
•
ASTM E162
•
ASTM E662
•
UL 1795
•
Specified Model
6’ BATH WHIRLPOOL
K-1124
Colors/Finishes
0: White
•
Other: Refer to Price Book for additional colors/finishes
•
Accessories
0: White
•
CP: Polished Chrome
•
Other: Refer to Price Book for additional colors/finishes
•
Model Description Colors/Finishes
K-1124 Drop-in bath whirlpool ❑ 0 ❑ Other_____
Required Accessories
K-7271 Clearflo slotted overflow brass bath drain OR ❑ CP ❑ Other_____
K-7272 Clearflo slotted overflow bath drain – PVC pipe ❑ CP ❑ Other_____
Optional Accessories
K-9529 Removable bath seat ❑ 0
Product Specification
The acrylic bath whirlpool shall be 72″ (1829 mm) in length, 36″ (914 mm) in width, and 19″ (483 mm) in height. Product shall
have 8 color-matched jets and armrests. Product shall feature a pump with air switch and grounding-type plug-in cord. Product
shall feature a slotted overflow for maximum bathing depth, low threshold height, and integral lumbar support. Bath whirlpool
shall be Kohler Model K-1124-______.
Page 1 of 2
1071364-4-
G
USA/Canada: 1-800-4KOHLER
(1-800-456-4537)
www.kohler.com
Page 2
ARCHERTM
Technical Information
Fixture*:
Bathing well
Basin area, bottom 51-3/8″ (1305 mm) x 21″ (533 mm)
Basin area, top 64-1/2″ (1638 mm) x 30-1/2″
(775 mm)
Weight 110 lbs (50 kg)
To overflow
Water depth 15″ (381 mm)
Capacity 72 gal (273 L)
* Approximate measurements for comparison only.
Drop-in cut-out 70-1/2″ (1791 mm) x 34-1/2″ (876
mm)
Pump: V Hz A
1-speed 120 60 7
Pump is supplied with 24” (610 mm) grounding-type
plug-in cord.
Required Electrical Service
Dedicated circuit required, protected with a Class A
Ground-Fault Circuit-Interrupter (GFCI):
Pump/control 120 V, 15 A, 60 Hz
Locate the outlet behind the whirlpool and within 24″
(610 mm) of the pump.
Installation Notes
Install this product according to the installation guide.
Floor support under this product must provide for a minimum
of 41 lbs/square foot (201 kg/square meter) loading.
This product is designed for drop-in installation only. It is not
suited for use in a three-wall alcove with an overhead shower.
The hot water supply should be 70% of the capacity of the
bath or greater. Installations will vary.
Will comply with ADA when installed per Section 607
Bathtubs of the Act.
18"
(457 mm)
1-1/4"
(32 mm)
2-1/2"
(64 mm)
1-1/2"
Bath Drain
11-1/4"
(286 mm)
72" (1829 mm)
4-1/8"
(105 mm)
No change in measurements if connected
with drain illustrated. (K-7272)
1-1/2"
(38 mm)
Drop-in Rim Detail
Pump/Control Access
20" (508 mm) W x 15" (381 mm) H
36" (914 mm)
19"
(483 mm)
3/4" (19 mm)
ARCHERTM 6’ BATH WHIRLPOOL
Page2of2
1071364-4-
G
Product Diagram
Loading...