Page 1
Features
•
Integral flange.
•
Left drain.
•
Integral lumbar support and armrests for comfort.
•
Textured bottom surface.
•
72" (1829 mm) x 36" (914 mm) x 20" (508 mm)
Material
•
Acrylic
Hydrotherapy
•
120 BubbleMassage™ airjets.
•
Zones of Control feature allows you to target massage to back,
midsection, or feet.
•
Automatic purge cycles remove residual water from air channels
after use.
•
Built-in 300 W heater.
•
Lighted keypad control.
Installation
•
Alcove
Recommended Accessories
K- 1283 Apron
K- 1446 Remote Installation Kit
K- 1491 Bath/Whirlpool Pillow
K- 1601 Bath/Whirlpool Footstop
K- 7166-AF Bath Drain
K- 24916 Wireless Music Kit
Mariposa
®
6' BubbleMassage™ Bath
K-1257-GLF
Codes/Standards
ASME A112.19.7/CSA B45.10
CSA B45.5/IAPMO Z124
ASTM E162
ASTM E662
UL 1795
Greenguard UL 2818 - Gold
CARB P2
KOHLER® One-Year Limited Warranty
See website for detailed warranty information.
Available Color/Finishes
Color tiles intended for reference only.
USA/Canada: 1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
3-6-2016 02:48
DescriptionCodeColor
White0
Biscuit96
Almond47
DuneNY
SandbarG9
Page 2
1-1/4"
Mariposa
®
6' BubbleMassage™ Bath
K-1257-GLF
Required Electrical Service
One dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI) or Residual Current Device
(RCD).
120 V, 15 A, 60 HzBlower:
Technical Information
All product dimensions are nominal.
3-Wall AlcoveInstallation:
LeftDrain location:
50" x 24" (1270 mm x 610 mm)Basin area, bottom:
65" x 27" (1651 mm x 686 mm)Basin area, top:
102 lbs (46.3 kg)Weight:
41 lbs/ft² (200.2 kg/m²)Minimum floor load:
14" (356 mm)Water depth:
72 gal (272.5 L)Water capacity:
Blower: 120 V, 10 A, 60 Hz, 300 WElectrical component
rating:
Notes
Measure your actual product for rough-in details.
Install this product according to the installation
instructions.
The hot water supply should be 70% of the
capacity of the bath or greater. Installations will
vary.
Provide one grounded electrical outlet within 24"
(610 mm) of each component.
If installing a rim-mount faucet, make sure there
is no interference with drain overflow before
drilling any holes. Consult local and national
codes for minimum air gap requirements if
installing a spout on the faucet deck.
Remote blower installation kit K-1446 is available
for relocating the blower. Provide access for
servicing the blower.
Do not relocate or alter the PVC tee or coiled
flexible tubing connected to the blower. Follow
the blower relocation instructions exactly.
USA/Canada: 1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
3-6-2016 02:48
Loading...