Page 1
MARIPOSATM
Features
Acrylic
•
Left or right outlet
•
Integral apron
•
Integral tile flange
•
60″ (1524 mm) x 36″ (914 mm) x 20″ (508 mm)
•
Codes/Standards Applicable
Specified model meets or exceeds the following:
CSA B45.5/IAPMO Z124
•
Specified Model
5’ BATH WITH INTEGRAL APRON
K-1242-LA
ALSO K-1242-RA
Colors/Finishes
0: White
•
Other: Refer to Price Book for additional colors/finishes
•
Accessories
CP: Polished Chrome
•
PB: Vibrant®Polished Brass
•
Other: Refer to Price Book for additional colors/finishes
•
Model Description Colors/Finishes
K-1242-LA Bath with integral apron – left-hand drain ❑ 0 ❑ Other_____
K-1242-RA Bath with integral apron – right-hand drain ❑ 0 ❑ Other_____
Recommended Accessories
K-7161-AF Drain ❑ CP ❑ PB ❑ Other_____
Product Specification:
The bath shall be 60” (1524 mm) in length, 36″ (914 mm) in width, and 20″ (508 mm) in height. Bath shall be made of acrylic.
Bath shall have left or right outlet. Bath shall have integral apron and integral tile flange. Bath shall be Kohler Model
K-1242-_______-_______.
Page 1 of 2
89404-4-
AD
USA/Canada: 1-800-4KOHLER
(1-800-456-4537)
www.kohler.com
Page 2
MARIPOSATM
Technical Information
Fixture:*
Bathing well
Basin area,
bottom
Basin area,
top
Weight 62 lbs (28.1 kg)
To overflow
Water depth 14″ (356 mm)
Capacity 63 gal (238.5 L)
* Approximate measurements for comparison only.
18"
(457 mm)
46″ (1168 mm) x 24″ (610 mm)
54″ (1372 mm) x 27″ (686 mm)
Installation Notes
Install this product according to the installation guide.
NOTE: Unless otherwise specified, floor support under bath
must provide for a minimum of 41 lbs./square foot (200
kg./square meter) loading.
If installing a rim-mount faucet, make sure any plumbing does
not interfere with the drain overflow before drilling any holes.
Consult local and national codes for minimum air gap
requirements if installing a spout on the faucet deck.
No changes in measurements if connected with
drain illustrated. (K-7161-AF)
Recommended Faucet Area
1-11/16"
(43 mm)
8-11/16" (221 mm)
60" (1524 mm)
3-1/2"
(89 mm)
1" (25 mm)
3" (76 mm)
2-7/8"
(73 mm)
Product Diagram
MARIPOSATM 5’ BATH WITH INTEGRAL APRON
Page2of2
89404-4-
AD
1-1/4"
(32 mm)
20"
(508 mm)
1-1/4"
(32 mm)
1/2" R.
(13 mm)
Flange Detail
36" (914 mm)
1-1/2" OD
Loading...