Page 1
MARIPOSA
®
Features
Acrylic
•
Drop-in or three-wall alcove
•
5 individually adjustable ProFlex
•
Pump with air switch and grounding-type plug-in cord
•
Optional K-9695 metal finish 5 jet trim kit
•
Optional K-1234 removable apron
•
66″ (1676 mm) x 35-7/8″ (911 mm) x 20″ (508 mm)
•
hydro-massage jets
®
Codes/Standards Applicable
Specified model meets or exceeds the following:
ASME A112.19.7
•
ASTM E162
•
ASTM E662
•
UL 1795
•
CSA B45.5/IAPMO Z124
•
Specified Model
BATH WHIRLPOOL
K-1224
ALSO K-1224-L, K-1224-R
Colors/Finishes
0: White
•
Other: Refer to Price Book for additional colors/finishes
•
Accessories
CP: Polished Chrome
•
PB: Vibrant®Polished Brass
•
Other: Refer to Price Book for additional colors/finishes
•
Model Description Colors/Finishes
K-1224 Bath whirlpool – drop-in ❑ 0 ❑ Other_____
K-1224-L Bath whirlpool with integral flange and left drain – 3-wall alcove (shown) ❑ 0 ❑ Other_____
K-1224-R Bath whirlpool with integral flange and right drain – 3-wall alcove ❑ 0 ❑ Other_____
Recommended Accessories
K-7161-AF Adjustable pop-up drain with tailpiece ❑ CP ❑ PB ❑ Other_____
Optional Accessories
K-1234 Removable apron ❑ 0 ❑ Other_____
K-9695 Metal finish 5 jet trim kit ❑ CP ❑ PB ❑ Other_____
Product Specification
The acrylic bath whirlpool shall be 60″ (1524 mm) in length, 35-7/8″ (911 mm) in width, and 20″ (508 mm) in height. Bath
whirlpool shall be for drop-in or 3-wall alcove installation. Bath whirlpool shall feature 5 individually adjustable Proflex
hydro-massage jets, a pump with air switch and grounding-type plug-in cord. Bath whirlpool shall be available with an optional
K-1234 removable apron and an optional K-9695 metal finish 5 jet trim kit. Bath whirlpool shall be Kohler Model K-1224-____
or K-1224-____-____.
Page 1 of 2
1014724-4-
D
USA/Canada: 1-800-4KOHLER
(1-800-456-4537)
www.kohler.com
®
Page 2
MARIPOSA
®
Technical Information
Required Electrical Service
Fixture*:
Bathing well:
Basin area, bottom 48″ (1219 mm) x 24″ (610 mm)
Basin area, top 59″ (1499 mm) x 30″ (762 mm)
Weight 110 lbs (49.9 kg)
To overflow:
Water depth 14″ (356 mm)
Capacity 67 gal (253.6 L)
* Approximate measurements for comparison only.
Drop-in cutout: 64″ (1626 mm) x 34″ (864 mm)
Pump: V Hz A
1-speed 120 60 7.5
18"
(457 mm)
1-11/16"
(43 mm)
8-11/16" (221 mm)
66" (1676 mm)
Dedicated circuit required, protected with a Class A
Ground-Fault Circuit-Interrupter (GFCI).
Pump/control 120 V, 15A, 60 Hz
Locate the outlet behind the whirlpool and within 24″
(610 mm) of the pump
Installation Notes
Install this product according to the installation guide.
Floor support under whirlpool must provide for a minimum of
48 lbs/square foot (232 kg/square meter).
If installing a rim-mount faucet, make sure there is no
interference with the drain overflow and circulating system
before drilling any holes. If installing a spout on the faucet
deck, consult local and national codes for minimum air gap
requirements.
The apron must be installed before the finished floor and wall
materials are installed.
No change in measurements if connected with drain
illustrated. (K-7161-AF or K-7161M-AF)
Recommended Faucet Area
1-1/4"
Pump/Control Access
(If Apron Is Not Used)
20" (508 mm) W x
15" (381 mm) H
35-7/8" (911 mm)
(32 mm)
1/2" (13 mm)
R. Max
Integral
Flange Detail
3-1/2"
(89 mm)
2-7/8"
3"
(73 mm)
(76 mm)
MARIPOSA®BATH WHIRLPOOL
Page2of2
1014724-4-
D
1" (25 mm)
Product Diagram
20"
(508 mm)
18-1/2"
(470 mm)
1-1/2" OD
1-1/2"
(38 mm)
Drop-in Rim
Detail
Loading...