Page 1
HOURGLASS®32
Features
Acrylic
•
Textured bottom surface
•
Available for drop-in installation [K-1219]
•
Available for three-side alcove installation with
•
integral tile flange [K-1219-L, K-1219-R]
Optional K-1278 removable apron
•
60″ (1524 mm) x 32″ (813 mm) x 20″ (508 mm)
•
Codes/Standards Applicable
Specified model meets or exceeds the following:
CSA B45.5/IAPMO Z124
•
Specified Model
K-1219
Colors/Finishes
0: White
•
Other: Refer to Price Book for additional colors/finishes
•
Accessories:
CP: Polished Chrome
•
PB: Vibrant®Polished Brass
•
Other: Refer to Price Book for additional colors/finishes
•
NA: None applicable
•
BATH
Model Description Colors/Finishes
K-1219 Drop-in rim style ❑ 0 ❑ Other_____
K-1219-L Integral tile flange, left drain ❑ 0 ❑ Other_____
K-1219-R Integral tile flange, right drain ❑ 0 ❑ Other_____
Recommended Accessories
K-7161-AF Bath drain – above or through-the-floor installation ❑ CP ❑ PB ❑ Other_____
Optional Accessories
K-1278 Removable apron ❑ 0 ❑ Other_____
K-1181 132″ (3353 mm) vinyl tiling-in bead ❑ NA
Product Specification
The acrylic bath shall be 60″ (1524 mm) in length, 32″ (813 mm) in width, and 20″ (508 mm) in height. Bath shall have a textured
bottom surface. Bath shall be available for drop-in installation [K-1219] or three-side alcove installation with integral tile flange
[K-1219-L, K-1219-R]. Bath shall have an optional K-1278 removable apron available. Bath shall be Kohler Model K-1219-____
or K-1219-____-____.
Page 1 of 2
115774-4-
BC
USA/Canada: 1-800-4KOHLER
(1-800-456-4537)
www.kohler.com
Page 2
HOURGLASS®32
Technical Information
Fixture*:
Bathing well:
Basin area, bottom 47″ (1194 mm) x 20″ (508 mm)
Basin area, top 53″ (1346 mm) x 23″ (584 mm)
Weight 80 lbs (36.3 kg)
To overflow
Water depth 14-1/2″ (368 mcm)
Capacity 64 gal (242.3 L)
* Approximate measurements for comparison only.
16"
(406 mm)
Installation Notes
Install this product according to the installation guide.
Floor support under this product must provide for a minimum
of 48 lbs/square foot (234 kg/square meter) loading.
The hot water supply should be 70% of the capacity of the
bath or greater. Installations will vary.
No change in measurements if connected
with drain illustrated. (K-7161-AF)
Recommended faucet area
1-11/16"
(43 mm)
8-11/16"
(221 mm)
1-1/4"
(32 mm)
3" (76 mm)
1-1/2" OD
HOURGLASS®32 BATH
Page2of2
115774-4-
BC
3"
(76 mm)
60" (1524 mm)
2-7/8"
(73 mm)
1" (25 mm)
20"
(508 mm)
Product Diagram
1-1/4"
(32 mm)
1/2"
(13 mm) R.
Integral
Flange Detail
18-1/2"
(470 mm)
1-1/2"
(38 mm)
Drop-In
Rim Detail
32" (813 mm)
Loading...