Page 1
FLUENCE
®
Features
CleanCoat
•
Frameless design maximizes glass area
•
Two roller-compression latches allow for smooth,
•
secure door closure
A concealed hinge provides smooth, stable operation
•
Inside and outside elegant brass pull handles
•
No top header eliminates clearance issues
•
Aluminum components extruded from alloy 6063-T5
•
Stainless steel hardware prevents rusting or corrosion
•
1/4″ (6 mm) thick tempered glass
•
Available in sizes to fit 28-3/4″ (730 mm) to 39″ (991
•
mm) opening
glass coating
®
Codes/Standards Applicable
Specified model meets or exceeds the following:
ANSI Z97.1 (tempered glass)
•
Specified Model
PIVOT SHOWER DOORS
K-702400
ALSO K-702402, K-702404, K-702406
Glass Options
L: Clear
•
G54: Falling Lines
•
G53: Rhapsody
•
Frame Finishes/Colors:
SH: Bright Silver
•
BH: Bright Brass
•
MX: Matte Nickel
•
ABV: Brushed Bronze
•
Model Application Glass Options Frame Finishes/Colors
K-702400 Shower ❑ L ❑ G54* ❑ G53 ❑ SH ❑ BH ❑ MX ❑ ABV
K-702402 Shower ❑ L ❑ G54* ❑ G53 ❑ SH ❑ BH ❑ MX ❑ ABV
K-702404 Shower ❑ L ❑ G54* ❑ G53 ❑ SH ❑ BH ❑ MX ❑ ABV
K-702406 Shower ❑ L ❑ G54* ❑ G53 ❑ SH ❑ BH ❑ MX ❑ ABV
K-702408 Shower ❑ L ❑ G54* ❑ G53 ❑ SH ❑ BH ❑ MX ❑ ABV
K-702410 Shower ❑ L ❑ G54* ❑ G53 ❑ SH ❑ BH ❑ MX ❑ ABV
* G54 glass option only available with Bright Silver or Matte Nickel frame colors
Continued on next page
Product Specification
Pivot shower door shall have a frameless design and CleanCoat glass coating. Door shall have inside and outside elegant brass
pull handles. Door shall have two roller-compression latches allowing for smooth, secure door closure. Door shall have a
concealed hinge providing a continuous contact point and smooth, stable operation. Door shall have no top header eliminating
clearance issues. Door shall be made of 1/4″ (6 mm) thick tempered glass. Door shall have aluminum components extruded
from alloy 6063-T5. Door shall have stainless steel hardware to prevent rust or corrosion. Door shall include all installation
hardware. Door shall have 1-1/2″ (38 mm) width adjustability for out-of-plumb conditions. Door shall be available in sizes to fit
28-3/4″ (730 mm) to 39″ (991 mm) opening. Shower door shall be Kohler Model K-_______-_______-_______.
Page 1 of 2
1036565-4-
H
USA/Canada: 1-800-4KOHLER
(1-800-456-4537)
www.kohler.com
Page 2
FLUENCE
Model Application Glass Options Frame Finishes/Colors
K-702412 Shower ❑ L ❑ G54* ❑ G53 ❑ SH ❑ BH ❑ MX ❑ ABV
K-702414 Shower ❑ L ❑ G54* ❑ G53 ❑ SH ❑ BH ❑ MX ❑ ABV
K-702416 Shower ❑ L ❑ SH
* G54 glass option only available with Bright Silver or Matte Nickel frame colors
®
Installation Notes
Install this product according to the installation guide.
Roughing-In Notes
Model
K-702400
K-702402
K-702404
K-702406
K-702408
K-702410
K-702412
K-702414
K-702416
A Width (Max / Min)
30-1/4" (768 mm) / 28-3/4" (730 mm)
31-1/2" (800 mm) / 30" (762 mm)
32-3/4" (832 mm) / 31-1/4" (794 mm)
34" (864 mm) / 32-1/2" (826 mm)
35-1/4" (895 mm) / 33-3/4" (857 mm)
36-1/2" (927 mm) / 35" (889 mm)
37-3/4" (959 mm) / 36-1/4" (921 mm)
39" (991 mm) / 37-1/2" (953 mm)
28-3/4" (730 mm) / 27-1/4" (692 mm)
B (Height)
65-1/2" (1664 mm)
65-1/2" (1664 mm)
65-1/2" (1664 mm)
65-1/2" (1664 mm)
65-1/2" (1664 mm)
65-1/2" (1664 mm)
65-1/2" (1664 mm)
65-1/2" (1664 mm)
65-1/2" (1664 mm)
C (Walk Through Max)
23-13/16" (605 mm)
25-1/16" (637 mm)
26-5/16" (668 mm)
27-9/16" (700 mm)
28-13/16" (732 mm)
30-1/16" (764 mm)
31-5/16" (795 mm)
32-9/16" (827 mm)
22-9/16" (573 mm)
A
FLUENCE®PIVOT SHOWER DOORS
Page2of2
1036565-4-
H
3-1/4"
(83 mm)
B
Product Diagram
1" (25 mm)
C
Loading...