Page 1
DEVONSHIRE
®
Features
Acrylic
•
Alcove installation
•
Integral apron and integral tile flange
•
Left or right drain
•
Arm rests and lumbar support to cradle the body
•
Textured bottom surface
•
60″ (1524 mm) x 32″ (813 mm) x 21-1/4″ (540 mm)
•
Codes/Standards Applicable
Specified model meets or exceeds the following:
CSA B45.5/IAPMO Z124
•
ASTM E162
•
ASTM E662
•
Specified Model
APRON BATH
K-1184-LA
ALSO K-1184-RA
Colors/Finishes
0: White
•
Other: Refer to Price Book for additional colors/finishes
•
Accessories
CP: Polished Chrome
•
PB: Vibrant®Polished Brass
•
Other: Refer to Price Book for additional colors/finishes
•
Model Description Colors/Finishes
K-1184-LA Apron bath, left drain (shown) ❑ 0 ❑ Other_____
K-1184-RA Apron bath, right drain ❑ 0 ❑ Other_____
Recommended Accessories
K-7161-AF Pop-up drain – above-the-floor installation OR ❑ CP ❑ PB ❑ Other_____
K-7213 Cable drain with PVC tee and pipe OR ❑ CP ❑ PB ❑ Other_____
K-7214 Cable drain without PVC tee and pipe OR ❑ CP ❑ PB ❑ Other_____
K-7259 Toe-tap drain ❑ CP ❑ Other_____
Optional Accessories
K-1491 Bath pillow ❑ 0 ❑ Other_____
K-1601 Bath footstop ❑ 0 ❑ Other_____
Product Specification
The acrylic bath shall be 60″ (1524 mm) in length, 32″ (813 mm) in width, and 21-1/4″ (540 mm) in height. Bath shall be for
alcove installation. Bath shall have a left or right drain. Bath shall feature an integral apron and integral tile flange. Bath shall
have arm rests and lumbar support to cradle the body. Bath shall feature a textured bottom surface. Bath shall be Kohler Model
K-1184-____-____.
Page 1 of 2
1206477-4-
A
USA/Canada: 1-800-4KOHLER
(1-800-456-4537)
www.kohler.com
Page 2
DEVONSHIRE
®
Technical Information
Fixture*:
Bathing well:
Basin area, bottom 42″ (1067 mm) x 20″ (508 mm)
Basin area, top 51″ (1295 mm) x 24″ (610 mm)
Weight 80 lbs (36.3 kg)
To overflow:
Water depth 14″ (356 mm)
Capacity 60 gal (277.1 L)
* Approximate measurements for comparison only.
Installation Notes
Install this product according to the installation guide.
Floor support under bath must provide for a minimum of 41
lbs/square foot (202 kg/square meter) loading.
16"
(406 mm)
3"
(76 mm)
1-1/2"
Bath Drain
9"
(229 mm)
1-1/4"
(32 mm)
60" (1524 mm)
2-1/2"
(64 mm)
1" (25 mm)
Lumbar
Angle
25˚
No change in measurements if connected with drain
illustrated. (K-7161-AF)
1-1/4"
(32 mm)
1/2" (13 mm)
R. Max
Integral Flange Detail
32" (813 mm)
21-1/4"
(540 mm)
20"
(508 mm)
DEVONSHIRE®APRON BATH
Page2of2
1206477-4-
A
Product Diagram
Loading...