Page 1
VAULTTM
Features
18-gauge stainless steel
•
Top-mount or under-mount
•
Offset bowls
•
Smart Divide
•
Includes left (large) bottom bowl rack
•
Includes installation hardware
•
Use for standard 36″ cabinet
•
33″ (838 mm) x 22″ (559 mm)
•
lowered divider
®
Codes/Standards Applicable
Specified model meets or exceeds the following:
ASME A112.19.3/CSA B45.4
•
TOP-MOUNT/UNDER-MOUNT
KITCHEN SINK
K-3839
Colors/Finishes
NA: None applicable
•
Accessories
CP: Polished Chrome
•
ST: Stainless Steel
•
NA: None applicable
•
Other: Refer to Price Book for additional colors/finishes
•
Specified Model
Model Description Colors/Finishes
K-3839-1 Top-mount/Under-mount kitchen sink – single-hole ❑ NA
K-3839-3 Top-mount/Under-mount kitchen sink – 3-hole ❑ NA
K-3839-4 Top-mount/Under-mount kitchen sink – 4-hole (shown) ❑ NA
Included Accessories
K-6646 Bottom bowl rack (fits large sink bowl) ❑ ST
Optional Accessories
K-6429 Sink bridge utility shelf with dish cloth bar ❑ ST
K-6432 Divider disk cloth bar ❑ ST
K-6434 Divider utility shelf ❑ ST
K-6647 Bottom bowl rack (for small bowl) (cont.) ❑ ST
Product Specification
The top-mount or under-mount sink shall be made of 18-gauge stainless steel. Sink shall feature offset bowls and Smart Divide
lowered divider. Sink shall include left (large) bottom bowl rack and installation hardware. Sink shall include SilentShield
sound-absorption technology. Sink shall be 33″ (838 mm) in length and 22″ (559 mm) in width. Sink shall be for use with
standard 36″ cabinet. Sink shall be Kohler Model K-3839-_____-NA.
Page 1 of 2
1161546-4-
USA/Canada: 1-800-4KOHLER
C
(1-800-456-4537)
www.kohler.com
Page 2
VAULTTM
(cont.) Optional Accessories
K-6667 Wood cutting board ❑ NA
K-8801 Duostrainer
1131881 Hardware kit for countertops with a 2-1/2″ (64 mm)
thickness or less
sink strainer ❑ CP ❑ Other_____
®
❑ NA
Technical Information
Fixture*:
Bowl area 17-1/2″ (445 mm) x 16-9/16″ (421 mm)
Water depth 9″ (229 mm)
Drain hole Ø 3-5/8″ (92 mm)
* Approximate measurements for comparison only.
Included components:
Hardware kit – top-mount 1130570
Cut-out template 1130823-7
11-5/8″ (295 mm) x 16-9/16″ (421 mm)
9-5/16" (237 mm)
2-7/16"
4" (102 mm)
K-3839-4
(62 mm)
Installation Notes
Install this product according to the installation guide.
Allow 3/4″ (19 mm) clearance beyond the back of the bowl for
the wood cutting board (optional accessory).
6-3/8" (162 mm)
6-1/2" (165 mm)
9-1/2"
(241 mm)
K-3839-3
4" (102 mm)
2-7/16"
(62 mm)
22"
(559 mm)
19-7/16" (494 mm)
13-9/16" (344 mm)
33" (838 mm)
14-11/16"
(373 mm)
1-1/2" OD
1-1/2" OD
Product Diagram
VAULTTM TOP-MOUNT/UNDER-MOUNT KITCHEN SINK
Page2of2
1161546-4-
C
4-5/16"
(110 mm)
K-3839-1
2-7/16"
(62 mm)
4-1/16"
(103 mm)
9-5/16"
(237 mm)
Loading...