Page 1
Features
CSA B651
OBC
•
4" (102 mm) centerset faucet holes.
•
Undulating oval basin.
•
Overflow drain.
Material
•
KOHLER® enameled cast iron.
Installation
•
Drop-in.
Recommended Products/Accessories
K-7107 Decorative Drain
K-7108 Decorative Drain
K-7129 Drain
K-9018 P-Trap
K-23726 Drain treatment
K-23725 Cast iron cleaner
Drop-in Bathroom Sink
Codes/Standards
ASME A112.19.1/CSA B45.2
ADA
ICC/ANSI A117.1
CSA B651
OBC
Tides
®
K-2839-4
Lifetime Limited Warranty for
KOHLER® Cast Iron Components
See website for detailed warranty information.
Available Colors/Finishes
Color tiles intended for reference only.
DescriptionCodeColor
White0
Sea Salt™FF
Biscuit96
DuneNY
Ice™ Grey95
BasaltFT
Ember™RR
Black 'n TanKA
Black Black™7
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
10-4-2020 06:19 - US/CA/MX
Page 2
1-1/8" (29 mm)
1-1/4" OD
3/8" Cold3/8" Hot
14"
(356 mm)
15-9/16"
(395 mm)
4" (102 mm)
2" (51 mm)
9-5/16"
(237 mm)
10" (254 mm)
20" (508 mm)
17"
(432 mm)
3-11/16"
(94 mm)
8-1/2"
(216 mm)
Recommended ADA Installation
24" (610 mm)
34"
(864 mm)
27"
(686 mm)
Min
11"
(279 mm)
9"
(229 mm)
Min
3-5/16"
(84 mm)
8"
(203 mm)
Min
Tides
®
Drop-in Bathroom Sink
K-2839-4
Technical Information
All product dimensions are nominal.
SingleBowl configuration:
Drop-inInstallation:
Bowl area (Only):
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
10-4-2020 06:19 - US/CA/MX
Length: 18-1/16" (459 mm)
Width: 10-3/16" (259 mm)
Water depth: 7-1/2" (191 mm)
3Number of deck holes:
4" (102 mm)Faucet hole spacing:
1-3/8" (35 mm)Faucet hole(s):
1-3/4" (44 mm)Drain hole:
1147017-7, required, includedTemplate:
Notes
Install this product according to the installation
instructions.
Spout must be 5" (127 mm) long (min) for
adequate clearance into the bathroom sink when
installed with the centerline as shown.
NOTICE: Countertop manufacturer or cutter must
use the cut-out template provided with product,
or a current one provided by Kohler Co. (call
1-800-4-KOHLER). Kohler Co. is not responsible
for the cut-out errors when the incorrect cut-out
template is used.
ADA, OBC, CSA B651 compliant when installed
to the specific requirements of these regulations.
Loading...