Page 1
SOHO
®
Features
Vitreous china
•
Wall-mount
•
Single center hole
•
With overflow
•
Drilled for concealed arm carrier
•
Optional soap dispenser hole on left (-L) or right (-R)
•
20″ (508 mm) x 18″ (457 mm)
•
Codes/Standards Applicable
Specified model meets or exceeds the following:
ADA
•
ICC/ANSI A117.1
•
CSA B651
•
OBC
•
ASME A112.19.2/CSA B45.1
•
Specified Model
WALL-MOUNT BATHROOM SINK
K-2084
ADA CSA B651
Colors/Finishes
0: White
•
Other: Refer to Price Book for additional colors/finishes
•
Accessories
CP: Polished Chrome
•
Other: Refer to Price Book for additional colors/finishes
•
OBC
Model Description Colors/Finishes
K-2084 Single-hole bathroom sink less soap dispenser hole ❑ 0 ❑ Other_____
K-2084-L Single-hole bathroom sink with soap dispenser hole on left ❑ 0 ❑ Other_____
K-2084-R Single-hole bathroom sink with soap dispenser hole on right ❑ 0 ❑ Other_____
K-2084-N Single-hole bathroom sink less overflow ❑ 0 ❑ Other_____
K-2084-NL Single-hole bathroom sink with soap dispenser hole on left less
overflow
K-2084-NR Single-hole bathroom sink with soap dispenser hole on right less
overflow
Recommended Accessories
K-8998 Trap ❑ CP ❑ Other_____
❑ 0 ❑ Other_____
❑ 0 ❑ Other_____
Product Specification
The wall-mount bathroom sink shall be made of vitreous china. Bathroom sink shall be 20” (508 mm) in length, and 18” (457
mm) in width. Bathroom sink shall have single-hole drilling. Bathroom sink shall have overflow. Bathroom sink shall be drilled
for concealed arm carrier. Bathroom sink shall have optional soap dispenser hole on left (-L) or right (-R). Bathroom sink shall
be Kohler Model K-2084-____.
Page 1 of 2
1007356-4-
G
USA/Canada: 1-800-4KOHLER
(1-800-456-4537)
www.kohler.com
Page 2
SOHO
®
Technical Information
Fixture*:
Basin area 18″ (457 mm) x 13″ (330
Water depth 4-7/8″ (124 mm)
Drain hole Ø 1-3/4″ (44 mm)
* Approximate measurements for comparison only.
Spout hole Ø 1-3/8″ (35 mm)
Soap dispenser hole Ø 1-1/4″ (32 mm)
mm)
Installation Notes
Install this product according to the installation guide.
Will comply with ADA when installed per Section 606
Lavatories of the Act.
Will comply with CSA B651 when installed per Clause 4.3.3
of the standard.
Will comply with OBC when installed per Clause 3.8.3.11.
2-1/8"
(54 mm)
8-1/2"
(216 mm)
13-3/4"
(349 mm)
Ø 1-1/4"
Leveling
Screw Hole
29-1/4"
(743 mm)
6-5/8" (168 mm)
-L
16-1/4" (413 mm)
20" (508 mm)
16-1/2" (419 mm)
3/8" Hot
4" (102 mm)
Standard Installation
Concealed Arm
-R
Hole Locations
3-1/4"
(83 mm)
Ø 1-1/4"
Leveling
Screw Hole
Ø 1-1/4"
Locking Device Hole
4-1/8" (105 mm)
7"
(178 mm)
3/8" Cold
1-1/4" Outlet
6-7/16"
(164 mm)
18"
(457 mm)
12-5/8"
(321 mm)
14"
(356 mm)
31"
(787 mm)
18" (457 mm)
8"
(203 mm) Min
34"
(864 mm)
27"
(686 mm)
Min
Recommended ADA Installation
6"
(152 mm) Max
9"
(229 mm)
Min
SOHO®WALL-MOUNT BATHROOM SINK
Page2of2
1007356-4-
G
Product Diagram
Loading...