Page 1
Features
•
Brass construction.
•
Wall-mount installation.
•
Single-handle.
•
Lever handle.
•
Stationary spout.
•
Less drain.
•
Requires single-handle ceramic valve [K-307-K].
•
Available with an 8-1/4'' (210 mm) spout from wall to center of
drain.
•
1.5 gal/min (5.7 l/min) maximum flow rate [max at 60 psi (4.14
bar)].
Required Accessories
K-307-K Wall-mount Bathroom Sink Valve
Optional Accessories
K-7114
K-7124
K-7127
K-7129
Falling Water
®
Wall-mount Bathroom Sink Faucet Trim
K-T196
Codes/Standards
ASME A112.18.1/CSA B125.1
NSF 61
NSF 372
EPA WaterSense
ADA
ICC/ANSI A117.1
All applicable US Federal and State material
regulations
®
USA/Canada: 1-800-4KOHLER (1-800-456-4537)
www.kohler.com
2-18-2015 02:20
KOHLER® Faucet Lifetime Limited
Warranty
See website for detailed warranty information.
Available Color/Finishes
Color tiles intended for reference only.
DescriptionCodeColor
Polished ChromeCP
Vibrant® Brushed NickelBN
Page 2
1-1/2" (38 mm) to
Falling Water
®
Wall-mount Bathroom Sink Faucet Trim
K-T196
Technical Information
All product dimensions are nominal.
8-1/4" (210 mm)Spout reach:
Faucet:
1.5 gal/min (5.7 l/min)Flow rate:
60 psi (4.1 bar)Pressure:
Notes
Install this product according to the installation
guide.
Install the wall-mount valve according to the valve
installation guide.
One 1-7/8" (48 mm) diameter cutout hole is
required for the spout. One 1-7/8" (48 mm)
diameter cutout hole is required for the handle.
ADA compliant when installed to the specific
requirements of these regulations.
USA/Canada: 1-800-4KOHLER (1-800-456-4537)
www.kohler.com
2-18-2015 02:20
Loading...