Page 1
BRENHAMTM
Features
Vitreous china
•
Wall-mount
•
With hanger
•
With overflow
•
Drilled for concealed arm carrier
•
8″ (203 mm) centers (-8), 4″ (102 mm) centers (-4),
•
or single-hole (-1)
Optional soap dispenser hole on left (-L) or right (-R)
•
(single-hole models only)
21-15/16″ (557 mm) x 19-3/4″ (502 mm)
•
Codes/Standards Applicable
Specified model meets or exceeds the following:
ADA
•
ICC/ANSI A117.1
•
TAS
•
CSA B651
•
OBC
•
ASME A112.19.2/CSA B45.1
•
Specified Model
WALL-MOUNT BATHROOM SINK
K-1997
CSA B651
Colors/Finishes
0: White
•
CP: Polished Chrome
•
Other: Refer to Price Book for additional colors/finishes
•
OBC
Model Description Colors/Finishes
K-1997-1 Wall-mount bathroom sink – single -hole, less soap dispenser hole ❑ 0 ❑ Other_____
K-1997-1L Wall-mount bathroom sink – single-hole, soap dispenser hole on left ❑ 0 ❑ Other_____
K-1997-1R Wall-mount bathroom sink – single-hole, soap dispenser hole on right ❑ 0 ❑ Other_____
K-1997-4 Wall-mount bathroom sink – 4″ (102 mm) centers, less soap dispenser
hole
K-1997-8 Wall-mount bathroom sink – 8″ (203 mm) centers, less soap dispenser
hole (shown)
Additional bathroom sinks are available without an overflow. Please refer to the Kohler Price Book.
Optional Accessories
K-8998 P-trap ❑ CP ❑ Other_____
K-1998 Shroud ❑ CP ❑ Other_____
❑ 0 ❑ Other_____
❑ 0 ❑ Other_____
Product Specification
The wall-mount bathroom sink shall be made of vitreous china. Product shall be 21-15/16″ (557 mm) in length and 19-3/4″ (502
mm) in width. Product shall be available with 8″ (203 mm) centers (-8), 4″ (102 mm) centers (-4), or single-hole (-1). Product
shall feature an overflow and hanger. Product shall be drilled for a concealed arm carrier. Product shall have an optional soap
dispenser hole on left (-L) or right (-R) (single-hole models only). Bathroom sink shall be Kohler Model K-1997-____-____.
Page 1 of 2
1100678-4-
G
USA/Canada: 1-800-4KOHLER
(1-800-456-4537)
www.kohler.com
Page 2
BRENHAMTM
Technical Information
Fixture*:
Basin area 14-3/8″ (406 mm) x 12-5/16″ (365 mm)
Water depth 3-1/4″ (83 mm)
Hole diameter
Drain 1-3/4″ (44 mm)
Spout 1997-1 1-3/8″ (35 mm)
1997-4 1-1/4″ (32 mm)
1997-8 1-3/8″ (35 mm)
Handle 1997-4 1-1/4″ (32 mm)
1997-8 1-3/8″ (35 mm)
Soap dispenser 1-1/4″ (32 mm)
* Approximate measurements for comparison only.
Concealed Arm
Hole Location
4"
(102 mm)
8-1/2"
13-3/4"
(216 mm)
(349 mm)
Ø 1-1/4" (32 mm)
Leveling Screw
Hole
31"
(787 mm)
29-1/8"
(714 mm)
28-1/2"
(724 mm)
Standard Installation
K-1997-8
4" (102 mm)
18-5/16" (465 mm)
21-15/16"
(557 mm)
9-1/4" (235 mm)
1-1/4" OD
4"
3/8"
Cold
3/8"
Hot
(102 mm)
2-11/16"
(68 mm)
Ø 1-1/4" (32 mm)
Locking Device
Holes
9/16" (14 mm)
4"
(102 mm)
Accessibility rough-in requirements:
ADA and TAS Children’s Environment
ADA and TAS Ages
6-12 yrs
A 34″ (864 mm) 31″ (787 mm)
B 27″ (686 mm) 24″ (610 mm)
C 11″ (279 mm) 11″ (279 mm)
D 9″ (229 mm) 9″ (229 mm)
E 8″ (203 mm) 8″ (203 mm)
Installation Notes
ADA and TAS standards permit parallel approach for children
ages K-5 yrs.
Will comply with ADA when installed per Section 606
Lavatories of the 2010 ADA Standards for Accessible Design.
Will comply with CSA B651 when installed per Clause 4.3.3
of the standard.
Will comply with OBC when installed per Clause 3.8.3.11.
7-15/16"
(202 mm)
6"
(152 mm)
19-3/4"
(502 mm)
9"
(229 mm)
A
Recommended ADA/TAS Installation
10-1/4"
(260 mm)
3-3/4"
(95 mm)
E
B
C
K-1997-4
4" (102 mm)
K-1997-1
3-3/4" (95 mm)
-L
D
-R
2-11/16"
(68 mm)
2-11/16"
(68 mm)
BRENHAMTM WALL-MOUNT BATHROOM SINK
Page2of2
1100678-4-
G
Product Diagram
Loading...