Page 1
Roughing-In
K-2356
ARCHER
COUNTERTOP LAVATORY
TM
Product Information
Applicable product:
8″ (20.3 cm) centers lavatory K-2356-8
4″ (10.2 cm) centers lavatory K-2356-4
Single-hole lavatory K-2356-1
Lavatory is ADA compliant when installed per the
requirements of the Accessibility Guidelines,
Section 606 Lavatories and Mirrors, of the Act.
Recommended accessory:
Adjustable P-Trap K-8998
Included components:
Cut-out template 1051936-7
Fixture*:
Basin area 16-7/8″ (42.9 cm) x 12-9/16″ (31.9 cm)
Water depth 4″ (10.2 cm)
Drain hole 1-3/4″ (4.4 cm) D.
* Approximate measurements for comparison only.
Holes K-2356-8 K-2356-4 K-2356-1
Spout 1-3/8″
(3.5 cm) D.
Faucet 1-3/8″
(3.5 cm) D.
1-1/4″
(3.2 cm) D.
1-1/4″
(3.2 cm) D.
1-3/8″
(3.5 cm) D.
Installation Notes
Install this product according to the installation guide.
NOTICE: Countertop manufacturer or cutter must use the
cut-out template provided with the product, or a current one
provided by Kohler Co. (call 1-800-4-KOHLER). Kohler Co. is
not responsible for cutout errors when the incorrect cut-out
template is used.
Fixture conforms to ASME Standard A112.19.2/CSA B45.1. All
dimensions are nominal.
19-7/16"
(49.4 cm)
14"
(35.6 cm)
11-5/16" (28.7 cm)
13-1/8"
(33.3 cm)
3/8" Hot
1-1/4" Outlet
K-2356-1
2-7/8" (7.3 cm)
22-5/8" (57.5 cm)
3/8" Cold
4" (10.2 cm)
Standard Installation
2-1/4" (5.7 cm)
13/16" (2.1 cm)
7-7/8"
(20 cm)
10-9/16"
(26.8 cm)
3" (7.6 cm)
24" (61 cm)
34" (86.4 cm)
8"
(20.3 cm)
Min
27"
(68.6 cm)
Min
9"
(22.9 cm)
Min
Recommended ADA Installation
K-2356-8
8" (20.3 cm)
2-1/4"
(5.7 cm)
K-2356-4
4" (10.2 cm)
2-1/4"
(5.7 cm)
6"
(15.2 cm)
Max
ARCHERTM COUNTERTOP LAVATORY
1063455-1-
B
Loading...