Page 1
Features
•
30-inch minimum base cabinet width.
•
Single bowl.
•
9-inch depth.
•
Tall 8-13/16-inch apron.
•
Self-Trimming apron overlaps the cabinet face for easy
installation.
•
No faucet holes.
•
Basin slopes 2 degrees toward drain to minimize water pooling.
•
Offset drain increases workspace in the sink and storage space
underneath.
•
Includes cutout templates.
Whitehaven
®
Under-Mount Apron-Front Kitchen Sink
K-6487
Material
•
KOHLER® enameled cast iron.
Installation
•
Under-mount apron-front.
Recommended Products/Accessories
K-9000 P-Trap
K-6638 Sink Rack
K-6377 Sponge Caddy
K-6378 Kitchen Brush Caddy
K-6379 Kitchen Squeegee
K-6382 Disinfecting Wipes Dispenser
K-6383 Soap Dispenser
K-8618 Paper Towel Holder
K-8619 Flexible Kitchen Mat
K-8624 Dish Scraper
K-8801 Sink Strainer
K-8799 Sink Strainer
Codes/Standards
ASME A112.19.1/CSA B45.2
KOHLER® Enameled Cast Iron Kitchen
Sink Lifetime Limited Warranty
See website for detailed warranty information.
Available Colors/Finishes
Color tiles intended for reference only.
DescriptionCodeColor
White0
Sea Salt™FF
Biscuit96
Almond47
Cane Sugar™FD
DuneNY
Ice™ Grey95
SandbarG9
Mexican Sand™33
CashmereK4
BasaltFT
Thunder™ Grey58
Suede20
Black 'n TanKA
CaviarFP
Black Black™7
Grey LavenderGRL
Indigo BlueDGB
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
9-12-2019 05:29 - US/CA/MX
Page 2
21-9/16"
Whitehaven
®
Under-Mount Apron-Front Kitchen Sink
K-6487
Technical Information
All product dimensions are nominal.
SingleBowl configuration:
Under-mountInstallation:
30" (762 mm)Min. base cabinet
width:
Bowl area (Only):
Template:
Length: 24-3/4" (629 mm)
Width: 18-1/16" (459 mm)
Bowl depth: 9" (229 mm)
3-5/8" (92 mm)Drain hole:
1156909-7, required, included
1157000, required, included
Notes
Install this product according to the installation
instructions.
IMPORTANT! The distance from the top edge of
the cabinet to the top of the cabinet door must be
at least 9" (229 mm) to install this sink.
NOTICE: Countertop manufacturer or cutter must
use the cutout template provided with the product,
or a current one provided by Kohler Co. (call
1-800-4-KOHLER). Kohler Co. is not responsible
for cutout errors when the incorrect cutout
template is used.
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
9-12-2019 05:29 - US/CA/MX
Loading...