Page 1
HYDRORAIL®-R
Features
For use in bath and shower installations
•
Designed for new installations or retrofit to replace an
•
existing installed shower arm
Incorporates two position diverter for Rainhead
•
showerhead or handshower operation
For use with temperature/volume control mixing valve
•
(not supplied)
Check valve installed in diverter valve for backflow
•
prevention
For use with Kohler Katalyst
•
handshowers, and shower hoses
Rainhead,
®
Codes/Standards Applicable
Specified model meets or exceeds the following:
ADA
•
ICC/ANSI A117.1
•
ASME A112.18.1/CSA B125.1
•
Specified Model
BATH/SHOWER COLUMN
K-45209
ALSO K-45210
Colors/Finishes
CP: Polished Chrome
•
Other: Refer to Price Book for additional colors/finishes
•
NA: None applicable
•
Model Description Colors/Finishes
K-45209 Bath/shower column – arched (shown) ❑ CP ❑ Other_____
K-45210 Bath/shower column – beam ❑ CP ❑ Other_____
Optional Accessories
K-13688 8″ Contemporary Round Katalyst Rainhead ❑ CP ❑ Other_____
K-13689 10″ Contemporary Round Katalyst Rainhead ❑ CP ❑ Other_____
K-13692 8″ Traditional Round Katalyst Rainhead ❑ CP ❑ Other_____
K-13695 8″ Contemporary Square Katalyst Rainhead ❑ CP ❑ Other_____
K-8593 Mastershower 72″ metal shower hose ❑ CP ❑ Other_____
K-9514 Mastershower 60″ metal shower hose ❑ CP ❑ Other_____
K-45981 72″ Ribbon shower hose ❑ CP ❑ Other_____
K-45982 60″ Ribbon shower hose (cont.) ❑ CP ❑ Other_____
Product Specification
The bath/shower column shall be used in bath and shower installations. Column shall be designed for new installations or retrofit
to replace an existing shower arm. Column shall incorporate two position diverter for Rainhead showerhead or handshower
operation. Column shall be used with temperature/volume control mixing valve (not supplied). Column shall have check valve
installed in diverter valve for backflow prevention. Column shall be for use with Kohler Katalyst Rainheads, handshowers, and
shower hoses. Column shall be Kohler Model K-______.
Page 1 of 2
1185108-4-
USA/Canada: 1-800-4KOHLER
B
(1-800-456-4537)
www.kohler.com
Page 2
HYDRORAIL®-R
(cont.) Optional Accessories
1194630 Deep roughing-in kit ❑ NA
1187917 Shallow roughing-in kit ❑ NA
1194302 Large escutcheon/mounting collar kit ❑ CP ❑ Other_____
Installation Notes
Install this product according to the installation guide.
ADA compliant when installed to the specific requirements of
these regulations.
IMPORTANT! To ensure correct product selection, verify
the following dimensions:
from the ceiling to the center of the existing shower
•
arm at the finished wall surface (Dimension A)
from the center of the existing shower arm to the
•
center of the mixing valve trim (Dimension B)
from the shower floor to the center of the existing
•
shower arm at the finished wall surface (Dimension
C)
from the supply elbow to the finished wall surface
•
(Dimension D)
K-45209 K-45210
17-15/16"
(456 mm)
Ø 3"
(76 mm)
A
If the distance from the elbow to the finished wall surface is
between 2-7/8″ (73 mm) to 4″ (102 mm), order the 1194630
deep roughing-in kit. (Dimension D)
If the distance from the elbow to the finished wall surface is
less than 1-3/8″ (35 mm), order the 1187917 shallow
roughing-in kit. (Dimension D)
A3″ (76 mm) escutcheon/mounting collar is supplied to fit a
1″ (25 mm) to 1-1/4″ (32 mm) supply connection hole
diameter. If the supply connection hole diameter is between
1-1/4″ (32 mm) to 2-1/4″ (57 mm), order the 1194302 large
escutcheon/mounting collar kit.
17-15/16"
(456 mm)
Upper Supply Connection
D
2-1/4"
(57 mm)
Backing
Material
27"
(686 mm)
Ø 3"
B
(76 mm)
6" (152 mm)
Min
C
NOTE: Valve trim and hose illustrated for
dimensioning only, not included in the product.
HYDRORAIL®-R BATH/SHOWER COLUMN
Page2of2
1185108-4-
B
2"
(51 mm)
K-45209
9-1/2"
(241 mm)
Minimum
K-45210
3-3/4"
(95 mm)
Minimum
Product Diagram
A
B
33"
(838 mm)
Minimum
33"
(838 mm)
Minimum
Finished
Wall
C
75" (1905 mm)
Recommended
72" (1829 mm)
Minimum To Floor
80" (2032 mm)
Recommended
75" (1905 mm)
Minimum To Floor
Elbow
D
1-3/8"
(35 mm)2-7/8"
(73 mm)
1-3/8"
(35 mm)2-7/8"
(73 mm)
Loading...