Page 1
TERCET
®
Features
Acrylic
•
For corner installation
•
120 BubbleMassage
•
Blower motor is supplied with a grounding-type
•
plug-in cord
Molded lumbar supports and armrests
•
Blower motor with 300 W heater and electronic user
•
control
Drop-in rim style or tile flange, right-hand blower
•
60″ (1524 mm) x 60″ (1524 mm) x 21″ (533 mm)
•
TM airjets
Codes/Standards Applicable
Specified model meets or exceeds the following:
CSA B45.5/IAPMO Z124
•
IAPMO IGC 171
•
UL 1795
•
ASTM E162
•
ASTM E662
•
Specified Model
CORNER BATH WITH AIRJETS
K-1160-G
ALSO K-1160-GF
K-1160-G
K-1160-GF
Colors/Finishes
0: White
•
Other: Refer to Price Book for additional colors/finishes
•
Accessories
CP: Polished Chrome
•
0: White
•
Other: Refer to Price Book for additional colors/finishes
•
Model Description Colors/Finishes
K-1160-G Corner bath with airjets – drop-in rim style ❑ 0 ❑ Other_____
K-1160-GF Corner bath with airjets – tile flange ❑ 0 ❑ Other_____
Recommended Accessories
K-11677 Trip lever drain – through-the-floor installation ❑ CP
Optional Accessories
K-1491 Pillow ❑ 0 ❑ Other_____
Product Specification
The acrylic drop-in bath with airjets shall be 60” (1524 mm) in length, 60″ (1524 mm) in width, and 21” (533 mm) in height.
Product shall be for corner installation. Product shall be available as drop-in rim style or tile flange, right-hand blower. Product
shall have a blower motor with 300 W heater and an electronic user control. Blower motor shall have a grounding-type plug-in
cord. Product shall have 120 BubbleMassage airjets and molded lumbar supports and armrests. Bath with airjets shall be Kohler
Model K-1160-____-____.
Page 1 of 2
1079333-4-
D
USA/Canada: 1-800-4KOHLER
(1-800-456-4537)
www.kohler.com
Page 2
TERCET
®
Technical Information
Required Electrical Service
Fixture*:
Bathing well:
Basin area,
bottom
Basin area,
top
Weight 127 lbs (57.6 kg)
To overflow:
Water depth 15″ (381 mm)
Capacity 96 gal (363.6 L)
* Approximate measurements for comparison only.
Blower motor Heater V Hz A
63"
(1600 mm)
52” (1321 mm) x 38-3/4” (984 mm)
61” (1549 mm) x 46-1/4” (1175 mm)
300 W 120 60 5
35"
(889 mm)
Dedicated circuit required, protected with a Class A
Ground-Fault Circuit-Interrupter (GFCI):
Pump/control 120 V, 5 A, 60 Hz
Locate the outlet behind the bath and within 24″ (610
mm) of the pump.
Installation Notes
Install this product according to the installation guide.
Floor support under this product must provide for a minimum
of 39 lbs/square foot (190 kg/square meter) loading.
No change in measurements if connected with
drain illustrated. (K-11677)
Recommended faucet area
60"
(1524 mm)
21"
(533 mm)
1-1/8" (29 mm) from the
Floor to the Bottom
of the Drain
35"
(889 mm)
19-1/2"
(495 mm)
29-1/8"
(740 mm)
60" (1524 mm)
29-1/8"
(740 mm)
Blower/Control Access
4-7/8"
(124 mm)
13-5/8"
(346 mm)
43-3/4"
(1111 mm)
2-7/8"
(73 mm)
1-1/2" OD
Product Diagram
1-1/4"
(32 mm)
Tile Flange
Detail
57-1/2"
(1461 mm)
Drop-In Rim Style
3" (76 mm)
1-1/2"
(38 mm)
Drop-In Rim
Detail
135˚
27-1/2" (699 mm)
Cut-Out Detail
2-7/8"
(73 mm)
TERCET®CORNER BATH WITH AIRJETS
Page2of2
1079333-4-
D
Loading...