Page 1
TEA-FOR-TWO
®
Features
Cast iron with Safeguard
•
Blower motor with 300 W heater and electronic
•
back-lit user control
44 BubbleMassage
•
40 BubbleMassageTM airjets with chromatherapy
•
18 levels of airflow adjustability
•
With Zones of Control
•
features
66″ (1676 mm) x 36″ (914 mm) x 24″ (610 mm)
•
TM airjets less chromatherapy
finish
®
TM, surge, and automatic purge
Codes/Standards Applicable
Specified model meets or exceeds the following:
ASME A112.19.1/CSA B45.2
•
ASME A112.19.7
•
CSA C22.2 No 218.2
•
UL 1795
•
5.5’ (1.7 m) BUBBLEMASSAGETM
K-856-G
ALSO K-856-GC
Colors/Finishes
0: White
•
CP: Polished Chrome
•
NA: None applicable
•
Other: Refer to Price Book for additional colors/finishes
•
BATH
Specified Model
Model Description Airjet Trim Color Colors/Finishes
K-856-G 5.5’ (1.7 m) BubbleMassage bath – less
chromatherapy
K-856-GC 5.5’ (1.7 m) BubbleMassage bath – with
chromatherapy
Required Accessories
K-7147-AF Pop-up bath drain ❑ CP ❑ Other_____
Optional Accessories
K-587 Undermount installation kit (template and installation guide) ❑ NA
K-1705 Remote control ❑ NA
K-9498 3″ (76 mm) keypad trim ❑ CP ❑ Other_____
❑ CP ❑ Other_____ ❑ 0 ❑ Other_____
❑ CP ❑ Other_____ ❑ 0 ❑ Other_____
Product Specification
The BubbleMassage bath shall be made of cast iron with Safeguard finish. Bath shall be 66″ (1676 mm) in length, 36″ (914 mm)
in width, and 24″ (610 mm) in height. Bath shall have 44 BubbleMassage airjets less chromatherapy or 40 BubbleMassage
airjets with chromatherapy. Bath shall have a blower motor with 300 W heater and electronic back-lit user control. Bath shall
have 18 levels of airflow adjustability. Bath shall be with Zones of Control
Kohler Model K-856-G____-____ or K-856-GC____-____.
TM, surge, and automatic purge features. Bath shall be
Page 1 of 2
1146821-4-
USA/Canada: 1-800-4KOHLER
B
(1-800-456-4537)
www.kohler.com
Page 2
TEA-FOR-TWO
Technical Information
®
Required Electrical Service
Fixture*:
Bathing well:
Basin area, bottom 45″ (1143 mm) x 25″ (635 mm)
Basin area, top 58″ (1473 mm) x 29″ (737 mm)
Weight 510 lbs (231.3 kg)
To overflow:
Water depth 19-1/2″ (495 mm)
Capacity 105 gal (397.5 L)
* Approximate measurements for comparison only.
Drop-in cut-out 64-1/2″ (1638 mm) x
Cut-out for undermount K-587
Blower
motor:
Heater V Hz A
300 W 220-240 50/60 3
1-1/2"
(38 mm)
34-1/2″ (876 mm)
66" (1676 mm)
Dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI):
Blower motor/control 220-240 V, 15 A, 50/60 Hz
Installation Notes
Install this product according to the installation guide.
NOTICE: If the blower motor and check valve are
relocated, two access panels are required. Locate one
access panel at the blower motor/control location and the
other at the control box. Locate the blower motor and check
valve together.
Floor support under bath must provide for a minimum of 86
lbs/square foot (418 kg/square meter) loading.
Splitting the deck/surround is recommended if installing into a
deck.
Hot water supply should be 70% of capacity or greater.
Installations will vary.
1"
(25 mm)
18"
(457 mm)
2-1/2"
(64 mm)
2-7/8"
(73 mm)
15-7/8"
(403 mm)
3" (76 mm)
No change in measurements if connected with
drain illustrated. (K-7147-AF)
NOTE: Blower protrusion beyond the rim.
Blower Motor/Control Access
34" (864 mm) W x
15" (381 mm) H
36" (914 mm)
3/4"
(19 mm)
24"
(610 mm)
1/2" (13 mm)
1-1/2" OD
Product Diagram
TEA-FOR-TWO®5.5’ (1.7 m) BUBBLEMASSAGETM BATH
Page2of2
1146821-4-
B
Loading...