Page 1
TEA-FOR-TWO
®
Features
Cast iron with Safeguard
•
Variable speed pump with 1.5 kW heater, back-lit
•
user keypad, and remote control
6 Flexjets
•
UL listed
•
Less all trim
•
Custom pump locations
•
71-3/4″ (1822 mm) x 36″ (914 mm) x 20-7/8″
•
(530 mm)
TM
®
finish
Codes/Standards Applicable
Specified model meets or exceeds the following:
ASME A112.19.1/CSA B45.2
•
ASME A112.19.7
•
CSA B45.10
•
CSA C22.2 No 218.2
•
UL 1795
•
Specified Model
6’ BATH WHIRLPOOL
K-865-HB
ALSO K-865-HD, K-865-HM
Colors/Finishes
0: White
•
Other: Refer to Price Book for additional colors/finishes
•
Accessories
CP: Polished Chrome
•
PB: Vibrant®Polished Brass
•
Other: Refer to Price Book for additional colors/finishes
•
Model Description Colors/Finishes
K-865-HB 6’ bath whirlpool, custom pump ❑ 0 ❑ Other_____
K-865-HD 6’ bath whirlpool, custom pump ❑ 0 ❑ Other_____
K-865-HM 6’ bath whirlpool, custom pump ❑ 0 ❑ Other_____
Required Accessories
K-9696 Jet trim kit ❑ CP ❑ PB ❑ Other_____
K-7169-AF Clearflo pop-up bath drain ❑ CP ❑ PB ❑ Other_____
Optional Accessories
K-582 Undermount installation kit (template and installation instructions) ❑ NA
K-1179 Vinyl tiling-in bead (use when wall material contacts any top surface of bath) ❑ NA
Product Specification
The bath whirlpool shall be 71-3/4″ (1822 mm) in length, 36″ (914 mm) in width, and 20-7/8″ (530 mm) in height. Bath whirlpool
shall be made of cast iron with Safeguard
heater, back-lit user keypad, and remote control. Bath whirlpool shall have custom pump locations. Bath whirlpool shall be UL
listed and less all trim. Bath whirlpool shall be Kohler Model K-865-_______-_______.
Page 1 of 2
1019454-4-
E
finish. Bath whirlpool shall have 6 Flexjets, a variable speed pump with 1.5 kW
®
USA/Canada: 1-800-4KOHLER
(1-800-456-4537)
www.kohler.com
Page 2
TEA-FOR-TWO
Technical Information
®
Required Electrical Service
Fixture*:
Bathing well:
Basin area, bottom 49″ (1245 mm) x 22″ (559 mm)
Basin area, top 62″ (1575 mm) x 28″ (711 mm)
Weight 455 lbs (206.4 kg)
To overflow:
Water depth 17″ (432 mm)
Capacity 89 gal (336.9 L)
* Approximate measurements for comparison only.
Pump kW V A*
1.5 240 11
* Approximate measurements for comparison only.
Drop-in cut-out 70-1/4″ (1784 mm) x 34-1/2″ (876 mm)
Included component:
Cut-out for undermount K-582 template
K-865-HB
Pump/Control Access
34" (864 mm) W x 15" (381 mm) H
9" (229 mm)
Max
Dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI) or Residual
Current Device (RCD):
Pump/control 208-240 V, 20 A, 50/60 Hz
Installation Notes
Install this product according to the installation guide.
Floor support under whirlpool must provide for a minimum of
69 lbs/square foot (333 kg/square meter) loading.
Cast iron whirlpools are extremely heavy, making some
drop-in installations difficult. Splitting the deck/surround is
recommended if installing into a deck.
Hot water supply should be 70% of capacity or greater.
Installations will vary.
Pump must be relocated to custom position at the time of
installation. Provide adequate clearance.
No change in measurements if connected with drain
illustrated. (K-7169-AF or K-7169M-AF)
7" (178 mm)
Max
3-1/2"
18"
(89 mm)
(457 mm)
15-5/8"
2-1/2"
(397 mm)
(64 mm)
3" (76 mm)
TEA-FOR-TWO®6’ BATH WHIRLPOOL
Page2of2
1019454-4-
E
5" (127 mm) Max
71-3/4" (1822 mm)
2-7/8"
(73 mm)
Product Diagram
1/4" (6 mm)
K-865-HD
Pump/Control Access
34" (864 mm) W x 15" (381 mm) H
K-865-HM
Pump/Control Access
34" (864 mm) W x 15" (381 mm) H
3/4" (19 mm)
36" (914 mm)
20-7/8"
(530 mm)
1-1/2" OD
Loading...