Page 1
SYNCHRONY
FEA T URES
•
60” x 42” x 20”
•
Acrylic
•
System I - 3/4 hp pump with air switch actuator
•
5 factory-installed color-matched plastic Flexjets
•
UL Listed
•
With (K-1196) or without (K-1192) Softgrip grip handles
•
Optional K-1278 front apron
•
Optional K-1491 pillow
•
Pump is supplied with a grounding-type plug-in cord
CODES/STANDARDS APPLICABLE
Specified model meets or exceeds the following:
•
ANSI Z124.1
•
ASME/ANSI A112.19.7M
•
IAPMO/UPC
•
Underwriters Laboratories (UL)
•
CSA International B45
5’ BATH WHIRLPOOL
K-1192, K-1196
COLORS/FINISHES
• 0 White
• Other Refer to Fixtures Price Book for additional colors
Accessories:
• 0 White
• CP Polished Chrome
• PB Polished Brass
• NA None Applicable
• Other Refer to Faucets Price Book for additional finishes
SPECIFIED MODEL:
Model Description Colors/Finishe s
K-1192 Bath whirlpool without Softgrip grip handles
K-1196 Bath whirlpool with Softgrip grip handles
Recommended Accesso ries
K-7161-AF Drain
Optio n al Accesso ri es
K-1278 Apron (removable)
K-9695 Flexjet trim kit (metal finishes )
K-1177 Vinyl tiling-in bead (use when wall material contacts any top surface of bath)
K-1491 Pillow
0 White Other______
0 White Other______
CP PB Other______
0 White Other______
CP PB Other______
NA
0 White Other______
PRODUCT SPECIFICATION:
The bath whirlpool shall be 60” in length, 42” in width, and 20” in height. Bath whirlpool shall be made of acrylic. Bath whirlpool
shall have System I - 3/4 hp pump with air switch actuator. Bath whirlpool shall have 5 factory-installed color-matched plastic
Flexjets. Bath whirlpool shall be UL Listed. Bath whirlpool shall be with (K-1196) or without (K-1 192) Softgrip grip handles. Bath
whirlpool shall have optional K-1278 front apron. Bath whirlpool shall have optional K-1491 pillow. Bath whirlpool pump shall
be supplied with a grounding- type plug-in cord. Bat h whirlpool shall be Kohler Model K-_______-_______.
We reserve the right to make revisions without notice in the design of fixtures or in packaging
unless this right has specific ally been waived at the tim e the order is accept ed.
Page 1 of 2
87972-4-AB
Page 2
SYNCHRONY
REQUIRED ELECTRICAL SERVICE
Dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI):
Pump/control 120 V, 15 A, 60 Hz
PRODUCT INFORMATION
Fixture*: basin area top area weight
Bathing well 42” x 25” 52” x 34” 105 lbs.
water depth capacity
To overflow 14” 63 gal.
* Approximate measurements for comparison only.
Pump: HP V Hz A
1-speed 3/4 120 60 10.5
INSTALLATION NOTES
NOTICE: Unless other wise specified, floor support under whirl-
pool must provide for a minimum of 80 lbs./square foot loading.
If installing a rim-mount faucet, make sure there is no interfer-
ence with drain overflow and circulating system before drilling
any holes. Consult local and national codes for minim um air
gap requirements if installing a spout on the faucet deck .
The apron must be installed before the finish floor and wall
materials are installed.
Each pump is supplied with grounding-type plug-in cord. Locate
the outlet behind the whirlpool, and within 24” of the pump.
Roughing-In Notes
No change in measurements if connected with drain
illustrated.
Cut-out 58” x 40”
Faucet area recommended
Minimum access panel:
Pump/control 20” W x 15” H required
21”
1-11/16”
8-11/16”
60”
3-9/16”
18-1/2”
2-7/8”
3”
1.25>132
1”
PRODUCT DIAGRAM
K-1192, K-1196 Synchrony 5’ Bath Whirlpool
Page 2 of 2
87972-4-AB
PUMP/CONTROL ACCESS
(IF APRON IS NOT USED)
42”
20”
1-1/2” O.D.
Loading...