Page 1
PROFLEX®7236
Features
ExoCrylic
•
Pump with air switch and grounding-type plug-in cord
•
Six individually adjustable ProFlex
•
jets
Custom pump locations
•
Drop-in installation
•
Molded lumbar support and armrests for comfort
•
Optional K-1283 removable apron
•
Optional K-9696 whirlpool trim kit in additional
•
finishes
72″ (1829 mm) x 36″ (914 mm) x 20-1/8″ (511 mm)
•
TM
hydro-massage
®
Codes/Standards Applicable
Specified model meets or exceeds the following:
ASME A112.19.7/CSA B45.10
•
CSA B45.5/IAPMO Z124
•
UL 1795
•
Specified Model
CUSTOM WHIRLPOOL BATH
K-1157-CN
Colors/Finishes
0: White
•
Other: Refer to Price Book for additional colors/finishes
•
Accessories
0: White
•
CP: Polished Chrome
•
PB: Vibrant®Polished Brass
•
Other: Refer to Price Book for additional colors/finishes
•
Model Description Colors/Finishes
K-1157-CN Custom whirlpool bath ❑ 0 ❑ Other_____
Recommended Accessories
K-11677 Swiftflo
Optional Accessories
K-1283 Removable apron ❑ 0 ❑ Other_____
K-1491 Removable bath pillow ❑ 0 ❑ Other_____
K-9696 Jet trim kit (metal finishes) ❑ CP ❑ PB ❑ Other_____
TM adjustable trip lever bath drain ❑ CP ❑ PB
Product Specification
The ExoCrylic whirlpool bath shall be 72″ (1829 mm) in length, 36″ (914 mm) in width, and 20-1/8″ (511 mm) in height. Whirlpool
shall be drop-in with custom pump locations. Whirlpool shall have six individually adjustable ProFlex hydro-massage jets, and
pump with air switch and grounding-type plug-in cord. Whirlpool shall have molded lumbar support and armrests for comfort.
Whirlpool shall feature optional K-1283 removable apron and K-9696 whirlpool trim kit in additional finishes. Whirlpool bath shall
be Kohler Model K-1157-CN-______.
Page 1 of 2
1012989-4-
G
USA/Canada: 1-800-4KOHLER
(1-800-456-4537)
www.kohler.com
Page 2
PROFLEX®7236
Technical Information
Fixture*:
Bathing well:
Basin area, bottom 55″ (1397 mm) x 21″ (533 mm)
Basin area, top 65″ (1651 mm) x 26″ (660 mm)
Weight 66 lbs (29.9 kg)
To overflow:
Water depth 15″ (381 mm)
Capacity 72 gal (272.5 L)
* Approximate measurements for comparison only.
Drop-in
cutout
Pump: V Hz A
1-speed 120 60 7.5
70-1/2″ (1791 mm) x 34-1/2″ (876 mm)
Required Electrical Service
Dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI):
Pump/control 120 V, 15 A, 60 Hz
Locate the outlet behind the whirlpool and within 24″
(610 mm) of the pump.
Installation Notes
Install this product according to the installation guide.
Floor support under whirlpool must provide for a minimum of
39 lbs/square foot (188 kg/square meter) loading.
The apron must be installed before the finished floor and wall
materials are installed.
Pump must be relocated to custom position at the time of
installation. Provide adequate clearance.
No change in measurements if connected with drain
illustrated. (K-11677)
18"
(457 mm)
Pump/Control Access
20" (508 mm) W
x 15" (381 mm) H
7-1/2"
(191 mm) Max
8-1/2"
(216 mm)
2-1/2" (64 mm)
72" (1829 mm)
2-7/8" (73 mm)
3" (76 mm)
PROFLEX®7236 CUSTOM WHIRLPOOL BATH
Page2of2
1012989-4-
G
Lumbar
Angle 34˚
1/4" (6 mm)
Product Diagram
20-1/8"
(511 mm)
1-1/2"
(38 mm)
Drop-in Rim Detail
36" (914 mm)
18-5/8"
(473 mm)
1-1/2" Bath Drain
Loading...