Page 1
TERCET
®
Features
Acrylic
•
Pump with air switch and grounding-type plug-in cord
•
6 individually adjustable ProFlex
•
Custom pump locations
•
Drop-in
•
Molded lumbar supports and armrests
•
Textured bottom surface
•
Optional K-9696 whirlpool trim kit in various finishes
•
60″ (1524 mm) x 60″ (1524 mm) x 21″ (533 mm)
•
hydro-massage jets
®
Codes/Standards Applicable
Specified model meets or exceeds the following:
ANSI Z124.1.2
•
ASME A112.19.7
•
UL 1795
•
ASTM E162
•
ASTM E662
•
Specified Model
BATH WHIRLPOOL WITH CUSTOM
K-1160-CD
Colors/Finishes
0: White
•
Other: Refer to Price Book for additional colors/finishes
•
Accessories
0: White
•
CP: Polished Chrome
•
PB: Polished Brass
•
Other: Refer to Price Book for additional colors/finishes
•
PUMP
Model Description Colors/Finishes
K-1160-CD Bath whirlpool – drop-in, custom pump (shown) ❑ 0 ❑ Other_____
Recommended Accessories
K-11677 Adjustable trip lever bath drain ❑ CP ❑ PB
Optional Accessories
K-1491 Pillow ❑ 0 ❑ Other_____
K-1601 Footstop ❑ 0 ❑ Other_____
K-9696 Jet trim kit (metal finishes) ❑ CP ❑ PB ❑ Other_____
Product Specification
The drop-in acrylic bath whirlpool shall be 60” (1524 mm) in length, 60″ (1524 mm) in width, and 21” (533 mm) in height. Product
shall have 6 individually adjustable ProFlex hydro-massage jets, a pump with air switch and grounding-type plug-in cord, a
textured bottom surface, and molded lumbar supports and armrests. Product shall have custom pump locations. Product shall
have an optional K-9696 whirlpool trim kit in various finishes. Bath whirlpool shall be Kohler Model K-1160-CD-____.
Page 1 of 2
1041917-4-
USA/Canada: 1-800-4KOHLER
D
(1-800-456-4537)
www.kohler.com
Page 2
TERCET
®
Technical Information
Required Electrical Service
Fixture*:
Basin area:
Bathing well 52” (1321 mm) x 38-3/4” (984 mm)
Top area 61” (1549 mm) x 46-1/4” (1175 mm)
Weight 127 lbs (57.6 kg)
To overflow:
Water depth 15” (381 mm)
Capacity 96 gal (363.6 L)
* Approximate measurements for comparison only.
Pump: V Hz A
1-speed 120 60 7.5
Minimum access panel
(required):
63"
(1600 mm)
20″ (508 mm) W x
15″ (381 mm) H
35"
(889 mm)
Dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI):
Pump/control 120 V, 15 A, 60 Hz
Locate the outlet behind the whirlpool and within 24”
(610 mm) of the pump.
Installation Notes
Install this product according to the installation guide.
Floor support under whirlpool must provide for a minimum of
39 lbs/square foot (189 kg/square meter) loading.
No change in measurements if connected with
drain illustrated. (K-11677 or K-11677M)
Recommended faucet area
35"
(889 mm)
60"
(1524 mm)
13-1/8"
(333 mm)
Pump/Control Access
21"
(533 mm)
19-1/2"
(495 mm)
29" (737 mm)
60" (1524 mm)
1/2" (13 mm)
3" (76 mm)
Product Diagram
TERCET®BATH WHIRLPOOL WITH CUSTOM PUMP
Page2of2
1041917-4-
D
29"
(737 mm)
4-7/8"
(124 mm)
43-3/4"
(1111 mm)
2-7/8" (73 mm)
2-7/8" (73 mm)
Drop-In Rim Detail
57-1/2"
(1461 mm)
27-1/2" (699 mm)
Drop-In Rim Style
1-1/2"
(38 mm)
135˚
135˚
Cut-Out Detail
1-1/2" OD
Loading...