Page 1
TERCET
®
Features
Acrylic
•
6 individually adjustable ProFlex
•
Drop-in
•
Molded lumbar supports and armrests
•
Textured bottom surface
•
Optional K-9696 whirlpool trim kit in various finishes
•
Pump with air switch and grounding-type plug-in cord
•
Integral tile flange on both sides for corner
•
installation. [K-1160-F]
60″ (1524 mm) x 60″ (1524 mm) x 21″ (533 mm)
•
hydro-massage jets
®
Codes/Standards Applicable
Specified model meets or exceeds the following:
ANSI Z124.1.2
•
ASME A112.19.7
•
UL 1795
•
ASTM E162
•
ASTM E662
•
Specified Model
BATH WHIRLPOOL
K-1160
ALSO K-1160-F
Colors/Finishes
0: White
•
Other: Refer to Price Book for additional colors/finishes
•
Accessories
0: White
•
CP: Polished Chrome
•
PB: Polished Brass
•
Other: Refer to Price Book for additional colors/finishes
•
Model Description Colors/Finishes
K-1160 Bath whirlpool – drop-in (shown) ❑ 0 ❑ Other_____
K-1160-F Bath whirlpool – integral tile flange ❑ 0 ❑ Other_____
Recommended Accessories
K-11677 Adjustable trip lever bath drain ❑ CP ❑ PB
Optional Accessories
K-1491 Pillow ❑ 0 ❑ Other_____
K-1601 Footstop ❑ 0 ❑ Other_____
K-9696 Jet trim kit (metal finishes) ❑ CP ❑ PB ❑ Other_____
Product Specification
The drop-in acrylic bath whirlpool shall be 60” (1524 mm) in length, 60″ (1524 mm) in width, and 21” (533 mm) in height. Product
shall have 6 individually adjustable ProFlex hydro-massage jets, a pump with air switch and grounding-type plug-in cord, a
textured bottom surface, and molded lumbar supports and armrests. Product shall have integral tile flange on both sides for
corner installation [K-1160-F]. Product shall have an optional K-9696 whirlpool trim kit in various finishes. Bath whirlpool shall
be Kohler Model K-1160-______ or K-1160-F-______.
Page 1 of 2
1041915-4-
USA/Canada: 1-800-4KOHLER
D
(1-800-456-4537)
www.kohler.com
Page 2
TERCET
®
Technical Information
Required Electrical Service
Fixture*:
Basin area:
Bathing well 52” (1321 mm) x 38-3/4” (984 mm)
Top area 61” (1549 mm) x 46-1/4” (1175 mm)
Weight 127 lbs (57.6 kg)
To overflow:
Water depth 15” (381 mm)
Capacity 96 gal (363.6 L)
* Approximate measurements for comparison only.
Pump: V Hz A
1-speed 120 60 7.5
Minimum access panel
(required):
63"
(1600 mm)
20″ (508 mm) W x
15″ (381 mm) H
35"
(889 mm)
Dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI):
Pump/control 120 V, 15 A, 60 Hz
Locate the outlet behind the whirlpool and within 24”
(610 mm) of the pump.
Installation Notes
Install this product according to the installation guide.
Floor support under whirlpool must provide for a minimum of
39 lbs/square foot (189 kg/square meter) loading.
No change in measurements if connected with
drain illustrated. (K-11677 or K-11677M)
Recommended faucet area
21"
(533 mm)
35"
(889 mm)
60"
(1524 mm)
19-1/2"
(495 mm)
29" (737 mm)
60" (1524 mm)
1/2" (13 mm)
Pump/Control
Access
29"
(737 mm)
4-7/8"
(124 mm)
13-1/8"
(333 mm)
43-3/4"
(1111 mm)
2-7/8"
(73 mm)
Ø 1-1/2"
Product Diagram
1-1/4"
(32 mm)
Tile Flange
Detail
57-1/2"
(1461 mm)
2-7/8" (73 mm)
1-1/2"
(38 mm)
Drop-In Rim
Detail
135˚
27-1/2" (699 mm)
Drop-In Rim Style
Cut-Out Detail
3" (76 mm)
TERCET®BATH WHIRLPOOL
Page2of2
1041915-4-
D
Loading...