Page 1
Roughing-In
K-1337-CN
SERIF
5’ CUSTOM BATH WHIRLPOOL
®
Product Information
Applicable product:
5’ Custom bath whirlpool, drop-in K-1337-CN
Fixture*:
Basin area:
Bathing well 42″ (1067 mm) x 28″ (711 mm)
Top area 55″ (1397 mm) x 40″ (1016 mm)
Weight 110 lbs (49.9 kg)
To overflow:
Water depth 15-1/2″ (394 mm)
Capacity 73 gal (276.3 L)
* Approximate measurements for comparison only.
Included components:
Cut-out template 1017044-7
Pump: V Hz A
1-speed 120 60 7.5
Required Electrical Service
Dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI):
Pump/control 120 V, 15 A, 60 Hz
Locate the outlet behind the whirlpool and within 24″
(610 mm) of the pump.
Installation Notes
Install this product according to the installation guide.
Floor support under whirlpool must provide for a minimum of
42 lbs/square foot (206 kg/square meter) loading.
Fixture conforms to CSA B45.5/IAPMO Z124. All dimensions
are nominal.
3-5/8"
(92 mm)
21-1/8"
(537 mm)
Pump/Control Access
20" (508 mm) W x
15" (381 mm) H Min
3-1/4" (83 mm)
2-7/8"
(73 mm)
3"
(76 mm)
11"
(279 mm)
1-1/2" OD
60" (1524 mm)
1" (25 mm)
No change in measurements if connected
with drain illustrated. (K-7166-AF)
1-1/4"
(32 mm)
42-1/4" (1073 mm)
21"
(533 mm)
SERIF®5’ CUSTOM BATH WHIRLPOOL
1017024-1-
E
Loading...