Page 1
PROFLEX®7242
Features
ExoCrylic
•
Drop-in installation
•
Six individually adjustable ProFlex
•
jets
Pump with air switch and grounding-type plug-in cord
•
Molded lumbar support and armrests for comfort
•
Optional K-1283 removable apron
•
Optional K-9696 whirlpool trim kit in additional
•
finishes
Custom pump locations
•
72″ (1829 mm) x 42″ (1067 mm) x 20-1/8″ (511 mm)
•
TM
hydro-massage
®
Codes/Standards Applicable
Specified model meets or exceeds the following:
ASME A112.19.7/CSA B45.10
•
CSA B45.5/IAPMO Z124
•
UL 1795
•
Specified Model
CUSTOM WHIRLPOOL BATH
K-1131-CE
Colors/Finishes
0: White
•
Other: Refer to Price Book for additional colors/finishes
•
Accessories
0: White
•
CP: Polished Chrome
•
PB: Vibrant®Polished Brass
•
Other: Refer to Price Book for additional colors/finishes
•
Model Description Colors/Finishes
K-1131-CE Custom whirlpool bath ❑ 0 ❑ Other_____
Recommended Accessories
K-7213 Clearflo bath cable drain with PVC tubing ❑ CP ❑ Other_____
K-7214 Clearflo bath cable drain without PVC tubing ❑ CP ❑ Other_____
K-11677 Adjustable trip lever drain ❑ CP ❑ PB
Optional Accessories
K-1283 Removable apron ❑ 0 ❑ Other_____
K-9696 Jet trim kit (metal finishes) ❑ CP ❑ PB ❑ Other_____
Product Specification
The ExoCrylic whirlpool bath shall be 72″ (1829 mm) in length, 42″ (1067 mm) in width, and 20-1/8″ (511 mm) in height.
Whirlpool shall be for drop-in installation. Whirlpool shall have six individually adjustable ProFlex hydro-massage jets, and pump
with air switch and grounding-type plug-in cord. Whirlpool shall have custom pump locations and molded lumbar support and
armrests for comfort. Whirlpool shall feature optional K-1283 removable apron and K-9696 whirlpool trim kit in additional
finishes. Whirlpool bath shall be Kohler Model K-1131-CE-______.
Page 1 of 2
1013050-4-
F
USA/Canada: 1-800-4KOHLER
(1-800-456-4537)
www.kohler.com
Page 2
PROFLEX®7242
Technical Information
Fixture*:
Bathing well:
Basin area, bottom 53″ (1346 mm) x 26″ (660 mm)
Basin area, top 65″ (1651 mm) x 34″ (864 mm)
Weight 70 lbs (31.8 kg)
To overflow:
Water depth 15″ (381 mm)
Capacity 78 gal (295.3 L)
* Approximate measurements for comparison only.
Drop-in cutout 70-1/2″ (1791 mm) x 40-1/2″
(1029 mm)
Pump: V Hz A
1-speed 120 60 7.5
5-1/2" (140 mm) Max
Required Electrical Service
Dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI):
Pump/control 120 V, 15 A, 60 Hz
Locate the outlet behind the whirlpool and within 24″
(610 mm) of the pump.
Installation Notes
Install this product according to the installation guide.
Floor support under whirlpool must provide for a minimum of
36 lbs/square foot (174 kg/square meter) loading.
The apron must be installed before the finished floor and wall
materials are installed.
Pump must be relocated to custom position at the time of
installation. Provide adequate clearance.
No change in measurements if connected with
drain illustrated. (K-11677)
Pump/Control
Access
20" (508 mm) W x
15" (381 mm) H
4-1/2"
(114 mm)
72" (1829 mm)
PROFLEX®7242 CUSTOM WHIRLPOOL BATH
Page2of2
1013050-4-
F
36" (914 mm)
20-1/8"
(511 mm)
1-1/2" Bath Drain
Product Diagram
14"
(356 mm)
2-1/2"
(64 mm)
3" (76 mm)
1-1/2"
(38 mm)
Drop-in Rim
Detail
42" (1067 mm)
1/4"
(6 mm)
2-7/8" (73 mm)
Loading...