Page 1
PROFLEX®7236
Features
ExoCrylic
•
Pump with air switch and grounding-type plug-in cord
•
Six individually adjustable ProFlex
•
jets
Custom pump locations
•
Drop-in installation
•
In-line heater
•
Molded lumbar support and armrests for comfort
•
Optional K-1283 removable apron
•
Optional K-9696 whirlpool trim kit in additional
•
finishes
72″ (1829 mm) x 36″ (914 mm) x 20-1/8″ (511 mm)
•
TM
hydro-massage
®
Codes/Standards Applicable
Specified model meets or exceeds the following:
ASME A112.19.7/CSA B45.10
•
CSA B45.5/IAPMO Z124
•
UL 1795
•
Specified Model
CUSTOM WHIRLPOOL BATH WITH
HEATER
K-1157-HN
Colors/Finishes
0: White
•
Other: Refer to Price Book for additional colors/finishes
•
Accessories
0: White
•
CP: Polished Chrome
•
PB: Vibrant®Polished Brass
•
Other: Refer to Price Book for additional colors/finishes
•
Model Description Colors/Finishes
K-1157-HN Custom whirlpool bath with heater ❑ 0 ❑ Other_____
Recommended Accessories
K-11677 Adjustable trip lever bath drain ❑ CP ❑ PB
Optional Accessories
K-1283 Removable apron ❑ 0 ❑ Other_____
K-9696 Jet trim kit (metal finishes) ❑ CP ❑ PB ❑ Other_____
Product Specification
The ExoCrylic bath whirlpool shall be 72″ (1829 mm) in length, 36″ (914 mm) in width, and 20-1/8″ (511 mm) in height. Whirlpool
shall be drop-in with custom pump locations. Product shall have six individually adjustable ProFlex hydro-massage jets, pump
with air switch and grounding-type plug-in cord, and in-line heater. Whirlpool shall have molded lumbar support and armrests
for comfort. Whirlpool shall feature optional K-1283 removable apron and K-9696 whirlpool trim kit in additional finishes.
Whirlpool bath shall be Kohler Model K-1157-HN-______.
Page 1 of 2
1012990-4-
E
USA/Canada: 1-800-4KOHLER
(1-800-456-4537)
www.kohler.com
Page 2
PROFLEX®7236
Technical Information
Fixture*:
Bathing well:
Basin area, bottom 55″ (1397 mm) x 21″ (533 mm)
Basin area, top 65″ (1651 mm) x 26″ (660 mm)
Weight 71 lbs (32.2 kg)
To overflow:
Water depth 15″ (381 mm)
Capacity 72 gal (272.5 L)
* Approximate measurements for comparison only.
Drop-in
cutout
Pump: V Hz A
1-speed 120 60 7.5
Heater: kW V Hz A
70-1/2″ (1791 mm) x 34-1/2″ (876 mm)
1.5 120 60 12.5
1"
(25 mm)
Required Electrical Service
Two dedicated circuits required, each protected with
Class A Ground-Fault Circuit-Interrupter (GFCI):
Pump/control 120 V, 15 A, 60 Hz
Heater 120 V, 15 A, 60 Hz
Locate the outlets behind the whirlpool and within 24″
(610 mm) of the pump.
Installation Notes
Install this product according to the installation guide.
Floor support under whirlpool must provide for a minimum of
39 lbs/square foot (189 kg/square meter) loading.
The apron must be installed before the finished floor and wall
materials are installed.
Pump must be relocated to custom position at the time of
installation. Provided adequate clearance.
No change in measurements if connected with
drain illustrated. (K-11677)
18"
(457 mm)
Pump/Control
Access
20" (508 mm) W
x 15" (381 mm) H
7-1/2"
(191 mm) Max
2-1/2"
(64 mm)
8-1/2"
(216 mm)
3" (76 mm)
Lumbar
Angle 34˚
72" (1829 mm)
1/4" (6 mm)
2-7/8" (73 mm)
Product Diagram
20-1/8"
(511 mm)
1-1/2"
(38 mm)
Drop-in Rim Detail
36" (914 mm)
18-5/8"
(473 mm)
1-1/2" Bath Drain
PROFLEX®7236 CUSTOM WHIRLPOOL BATH WITH HEATER
Page2of2
1012990-4-
E
Loading...