
UNDERSCORE
®
Features
Acrylic
•
Drop-in or undermount installation
•
Two raised corner seats, at 6-3/4″ (171 mm) and
•
11-7/8″ (302 mm) from bath floor
Blower motor with 300 W heater, electronic back-lit
•
user control, and remote control
122 BubbleMassage
•
With Zones of ControlTM feature
•
Available with chromatherapy [-GCR]
•
27-1/2″ (699 mm) soaking depth
•
48″ (1219 mm) x 48″ (1219 mm) x 34″ (864 mm)
•
TM airjets
Codes/Standards Applicable
Specified model meets or exceeds the following:
ASME A112.19.7
•
CSA B45.5/IAPMO Z124
•
UL 1795
•
Specified Model
CUBE BUBBLEMASSAGETM BATH
K-1969-G
ALSO K-1969-GCR
Colors/Finishes
0: White
•
Other: Refer to Price Book for additional colors/finishes
•
Accessories
CP: Polished Chrome
•
NA: None applicable
•
Other: Refer to Price Book for additional colors/finishes
•
Model Description Colors/Finishes
K-1969-G Cube BubbleMassage bath ❑ 0 ❑ Other_____
K-1969-GCR Cube BubbleMassage bath with chromatherapy ❑ 0 ❑ Other_____
Recommended Accessories
K-8150 Cable drain ❑ NA
K-8134 Drain trim kit ❑ CP ❑ Other_____
Optional Accessories
K-578 Undermount kit ❑ NA
Product Specification
The BubbleMassage bath shall be 48″ (1219 mm) in length, 48″ (1219 mm) in width, and 34″ (864 mm) in height. Bath shall
be made of acrylic. Bath shall be for drop-in or undermount installation. Bath shall have two raised corner seats, at 6-3/4″ (171
mm) and 11-7/8″ (302 mm) from bath floor. Bath shall have a blower motor with 300 W heater, electronic back-lit user control,
and remote control. Bath shall have 122 BubbleMassage airjets. Bath shall be with Zones of Control
available with chromatherapy. Bath shall have a 27-1/2″ (699 mm) soaking depth. Bath shall be Kohler Model K-1969-G-____
and K-1969-GCR-____
Page 1 of 2
1159617-4-
D
USA/Canada: 1-800-4KOHLER
TM feature. Bath shall be
(1-800-456-4537)
www.kohler.com

UNDERSCORE
Technical Information
®
Required Electrical Service
Fixture*:
Bathing well:
Basin area,
bottom
Basin area, top 44-5/8″ (1133 mm) x
Weight 150 lbs (68 kg)
To overflow:
Water depth 27-1/2″ (699 mm)
Capacity 171 gal (647.3 L)
* Approximate measurements for comparison only.
Drop-in cut-out 47″ (1194 mm) x 47″ (1194 mm)
Blower
motor/control:
39-3/8″ (1000 mm) x
39-3/8″ (1000 mm)
44-5/8″ (1133 mm)
Heater V Hz A
300 W 220-240 50/60 3
1-5/16" (33 mm)
Dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI) or Residual
Current Device (RCD):
Blower motor/control: 220-240 V, 15 A, 50/60 Hz
Installation Notes
Install this product according to the installation guide.
Floor support under bath must provide for a minimum of 105
lbs/square foot (513 kg/square meter) loading.
Hot water supply should be 70% of capacity or greater.
Installations will vary.
No change in measurements if connected
with drain illustrated. (K-8150)
48"
(1219 mm)
24"
(610 mm)
24"
(610 mm)
48" (1219 mm)
NOTE: Blower protrusion
beyond the rim.
1-1/8"
(28 mm)
1"
(25 mm)
34"
(864 mm)
Product Diagram
Blower Motor/Control Access
34" (864 mm) W x
15" (381 mm) H Max
3-1/2"
(89 mm)
3-7/8"
(99 mm)
1-5/8"
(41 mm)
1-1/2" OD
UNDERSCORE®CUBE BUBBLEMASSAGETM BATH
Page2of2
1159617-4-
D