Page 1
Features
Assists in performing a pressure test on drain, waste,
•
and vent (DWV) systems and water supply lines
Includes seal, plate, and cap screws
•
Intended for use with K-7271 and K-7272 slotted
•
overflow bath drains
Codes/Standards Applicable
Specified model meets or exceeds the following:
None applicable
•
Specified Model
SLOTTED OVERFLOW SEAL TEST
K-7117
Colors/Finishes
NA: None applicable
•
KIT
Model Description Colors/Finishes
K-7117 Slotted overflow seal test kit ❑ NA
Product Specification
The slotted overflow seal test kit shall assist in performing a pressure test on drain, waste, and vent (DWV) systems and water
supply lines. Product shall include a seal, a plate, and cap screws. Product is intended for use with K-7271 and K-7272 slotted
overflow bath drains. Slotted overflow seal test kit shall be Kohler Model K-7117-NA.
Page 1 of 2
1112219-4-
USA/Canada: 1-800-4KOHLER
B
(1-800-456-4537)
www.kohler.com
Page 2
Installation Notes
Install this product according to the installation guide.
Pressurize drain, water, and vent (DWV) systems and water
supply lines according to local codes.
Perform the pressure test before covering the new plumbing
with finished wall material.
2-11/16"
(68 mm)
1-7/8"
(48 mm)
10" (254 mm)
9-1/4" (235 mm)
Product Diagram
1-1/2" (38 mm)
1-11/16" (43 mm)
1/4"
(6 mm)
3/16"
(5 mm)
3/8"
(10 mm)
SLOTTED OVERFLOW SEAL TEST KIT
Page2of2
1112219-4-
B
Loading...