SERIF
®
Features
Acrylic
•
Oval shape
•
Drop-in
•
Pump with air switch and grounding-type plug-in cord
•
In-line heater
•
Optional K-1491 removable bath pillow
•
Optional K-9698 whirlpool trim kit in various finishes
•
8 individually adjustable ProFlex
•
Textured bottom surface
•
Coordinates with Serif suite
•
60″ (1524 mm) x 42-1/4″ (1073 mm) x 21″ (533 mm)
•
hydro-massage jets
®
Codes/Standards Applicable
Specified model meets or exceeds the following:
CSA B45.5/IAPMO Z124
•
ASME A112.19.7
•
UL 1795
•
ASTM E162
•
ASTM E662
•
Specified Model
5’ BATH WHIRLPOOL WITH HEATER
K-1337-H
Colors/Finishes
0: White
•
Other: Refer to Price Book for additional colors/finishes
•
Accessories:
0: White
•
CP: Polished Chrome
•
PB: Vibrant®Polished Brass
•
Other: Refer to Price Book for additional colors/finishes
•
Model Description Colors/Finishes
K-1337-H 5’ bath whirlpool ❑ 0 ❑ Other_____
Recommended Accessories
K-7166-AF Drain ❑ CP ❑ PB ❑ Other_____
Optional Accessories
K-1491 Pillow ❑ 0 ❑ Other_____
K-9698 Jet trim kit (metal finishes) ❑ CP ❑ PB ❑ Other_____
Product Specification
The oval bath whirlpool shall be 60″ (1524 mm) in length, 42-1/4″ (1073 mm) in width, and 21″ (533 mm) in height. The bath
whirlpool shall be made of acrylic for drop-in installation. The bath whirlpool shall have 8 individually adjustable ProFlex
hydro-massage jets, a pump with air switch and grounding-type plug-in cord, and an in-line heater. The bath whirlpool shall have
a textured bottom surface and shall coordinate with the Serif suite. The bath whirlpool shall have an optional K-9698 jet trim kit,
and an optional K-1491 removable pillow. The bath whirlpool shall be Kohler Model K-1337-H-______.
Page 1 of 2
1017026-4-
D
USA/Canada: 1-800-4KOHLER
(1-800-456-4537)
www.kohler.com
®
SERIF
®
Technical Information
Required Electrical Service
Fixture*:
Basin area:
Bathing well 42″ (1067 mm) x 28″ (711 mm)
Top area 55″ (1397 mm) x 40″ (1016 mm)
To overflow:
Water depth 15-1/2″ (394 mm)
Capacity 73 gal (276.3 L)
Weight 115 lbs (52 kg)
* Approximate measurements for comparison only.
Pump: V Hz A
1-speed 120 60 7.5
Heater: kW V Hz A
1.5 120 60 12.5
Included components:
Cutout template 1017044-7
11"
(279 mm)
Two dedicated circuits required, each protected with
Class A Ground-Fault Circuit-Interrupter (GFCI):
Pump/control 120 V, 15 A, 60 Hz
Heater 120 V, 15 A, 60 Hz
Locate the outlets behind the whirlpool and within
24″ (610 mm) of the pump and heater.
Installation Notes
Install this product according to the installation guide.
Floor support under whirlpool must provide for a minimum of
43 lbs/square foot (208 kg/square meter) loading.
Provide pump/control access in either location shown;
supplies must not interfere with pump/control access.
No change in measurements if connected
with drain illustrated.
21-1/8"
(537 mm)
3-1/4"
(83 mm)
3-5/8"
(92 mm)
2-7/8"
(73 mm)
3"
(76 mm)
1-1/4"
(32 mm)
Pump/Control Access
20" (508 mm) W x
5" (381 mm) H
60" (1524 mm)
42-1/4" (1073 mm)
21"
(533 mm)
1" (25 mm)
1-1/2" OD
Product Diagram
SERIF®5’ BATH WHIRLPOOL WITH HEATER
Page2of2
1017026-4-
D
Loading...