EVANDALETM
Features
Combination unit – vanity with stone top and lavatory
•
Mahogany veneers (F25 Sapele finish)
•
Painted substrate (F44 Lily finish)
•
Birch veneers (F80 Cocoa finish)
•
Lily finish or Cocoa finish with white lavatory
•
(K-2210), Sapele finish with black lavatory (K-2210)
Self-close adjustable door(s) with soft-close hinges
•
Rear leg allows placement away from the baseboard
•
(adjustable location)
30″ (762 mm) x 21″ (533 mm) x 33-1/2″ (851 mm)
•
Codes/Standards Applicable
Specified model meets or exceeds the following:
ATCM Sec. 93120-93120.12, Title 17, CA. Code of
•
Regulations
CARB P2
•
Specified Model
VANITY WITH STONE TOP AND
Colors/Finishes
F25: Sapele
•
F44: Lily
•
F80: Cocoa
•
Accessories
CP: Polished Chrome
•
F25: Sapele
•
F44: Lily
•
F80: Cocoa
•
GR1: Grey
•
NA: None applicable
•
LAVATORY
K-2732
Model Description Colors/Finishes
K-2732 Vanity with stone top and lavatory - 30″ (762 mm) ❑ F25 ❑ F44 ❑ F80
Recommended Accessories
K-8998 Adjustable P-Trap ❑ CP
Product Specification
Vanity shall be combination unit – vanity with stone top and lavatory. The vanity shall be 30″ (762 mm) in width and 21″ (533
mm) in depth, and 33-1/2″ (851 mm) in height. Vanity shall be made of mahogany veneers (F25 Sapele finish), or painted
substrate (F44 Lily finish), or birch veneers (F80 Cocoa finish). Vanity shall have Lily finish or Cocoa finish with white lavatory
(K-2210) or a Sapele finish with black lavatory (K-2210). Vanity shall have rear leg, which allows placement away from the
baseboard (adjustable location) and self-close adjustable door(s) with soft-close hinges. Vanity shall be Kohler Model
K-2732-____.
Page 1 of 2
1156332-4-
D
USA/Canada: 1-800-4KOHLER
(1-800-456-4537)
www.kohler.com
EVANDALETM
Recommended Accessories
K-2746 Mirror ❑ F25 ❑ F44 ❑ F80
K-2970 Mirror cabinet ❑ GR1 ❑ NA
Installation Notes
Install this product according to the installation guide.
Decorative cabinet hardware is supplied. Refer to the Kohler
bath accessories line for additional decorative cabinet
hardware to complement your vanity.
Select the type of fastener based on the wall material. A
minimum of 500 lbs (227 kg) load bearing fastener is
recommended.
3-1/8"
(79 mm)
33-1/2"
(851 mm)
4" (102 mm)
30" (762 mm)
15" (381 mm)
2-1/2"
(64 mm)
21" (533 mm)
11-13/16"
(300 mm)
14"
(356 mm)
36-1/2"
(927 mm)
7" (178 mm)
16-1/4"
(413 mm)
13-1/8"
(333 mm)
3/8" Hot
1-1/4" OD
C
L of Fitting
19-1/4"
(489 mm)
4" (102 mm)
2-5/8"
(67 mm)
1-1/8"
(29 mm)
1/2" (13 mm)
7-1/2"
(191 mm)
3/8" Cold
Product Diagram
EVANDALETM VANITY WITH STONE TOP AND LAVATORY
Page2of2
1156332-4-
D
Loading...