Page 1
MARIPOSA
®
Features
Acrylic
•
Left or right outlet
•
Integral apron
•
Integral tile flange
•
72″ (1829 mm) x 36″ (914 mm) x 20″ (508 mm)
•
Codes/Standards Applicable
Specified model meets or exceeds the following:
CSA B45.5/IAPMO Z124
•
Specified Model
6’ BATH WITH INTEGRAL APRON
K-1259-LA
ALSO K-1259-RA
Colors/Finishes
0: White
•
Other: Refer to Price Book for additional colors/finishes
•
Accessories
CP: Polished Chrome
•
PB: Vibrant®Polished Brass
•
Other: Refer to Price Book for additional colors/finishes
•
Model Description Colors/Finishes
K-1259-LA Bath with integral apron – left-hand drain (shown) ❑ 0 ❑ Other_____
K-1259-RA Bath with integral apron – right-hand drain ❑ 0 ❑ Other_____
Recommended Accessories
K-7166-AF Drain ❑ CP ❑ PB ❑ Other_____
Product Specification
The acrylic bath shall be 72″ (1829 mm) in length, 36″ (914 mm) in width, and 20″ (508 mm) in height. The bath shall have a
left or right outlet. The bath shall have an integral apron and tile flange. The bath shall be Kohler Model K-1259-_____-_____.
Page 1 of 2
89407-4-
AE
USA/Canada: 1-800-4KOHLER
(1-800-456-4537)
www.kohler.com
Page 2
MARIPOSA
®
Technical Information
Fixture*:
Bathing well:
Basin area,
bottom
Basin area, top 65″ (1651 mm) x 27″ (686 mm)
To overflow:
Water depth 14″ (356 mm)
Capacity 72 gal (272.5 L)
Weight 77 lbs (34.9 kg)
* Approximate measurements for comparison only.
50″ (1270 mm) x 24″ (610 mm)
Installation Notes
Install this product according to the installation guide.
Refer to installation instructions included with fixture before
beginning installation.
NOTICE: Unless otherwise specified, floor support under bath
must provide for a minimum of 39 lbs/square foot
(191 kg/square meter) loading.
If installing a rim-mount faucet, make sure there is no
interference with drain overflow and circulating system before
drilling any holes. Consult local and national codes for
minimum air gap requirements if installing a spout on the
faucet deck.
18"
(457 mm)
1-13/16"
(46 mm)
3-1/2"
(89 mm)
10-1/4"
(260 mm)
1-1/4"
(32 mm)
3"
(76 mm)
72" (1829 mm)
2-7/8"
1" (25 mm)
(73 mm)
No change in measurements if connected with
drain illustrated. (K-7166-AF)
Recommended Faucet Area
1-1/4"
(32 mm)
1/2"
(13 mm) R.
Integral Flange
Detail
36" (914 mm)
20"
(508 mm)
1-1/2" OD
MARIPOSA®6’ BATH WITH INTEGRAL APRON
Page2of2
89407-4-
AE
Product Diagram
Loading...