Kohler KOH14132 Specifications

UNDERSCORE
®
Features
Acrylic
Blower motor with 300 W heater and electronic
back-lit user control 122 BubbleMassage
Zones of ControlTM concentrates massage at back,
72(1829 mm) x 42(1067 mm) x 23(584 mm)
TM airjets
Codes/Standards Applicable
Specified model meets or exceeds the following:
CSA B45.5/IAPMO Z124
IAPMO IGC 171
ASME A112.19.7
ASTM E162
ASTM E662
Specified Model
6’ BUBBLEMASSAGETM BATH
K-1174-G
ALSO K-1174-GCR
Colors/Finishes
0: White
Other: Refer to Price Book for additional colors/finishes
Accessories
0: White
CP: Polished Chrome
Other: Refer to Price Book for additional colors/finishes
NA: None applicable
Model Description Colors/Finishes
K-1174-G 6’ BubbleMassage bath 0 Other_____ K-1174-GCR 6’ BubbleMassage bath with chromatherapy 0 Other_____
Required Accessories
K-7271 Clearflo slotted overflow brass bath drain OR CP Other_____ K-7272 Clearflo slotted overflow bath drain – PVC pipe CP Other_____
Optional Accessories
K-592 Undermount kit N/A
K-1491 Pillow 0 Other_____ K-1601 Footstop 0 Other_____
Product Specification
The acrylic BubbleMassage bath shall be 72(1829 mm) in length, 42(1067 mm) in width, and 23(584 mm) in height. Product shall have a blower motor with 300 W heater and electronic back-lit user control. Product shall feature Zones of Control and 122 BubbleMassage airjets. Product shall be available with chromatherapy [-GCR]. BubbleMassage bath shall be Kohler Model K-1174-____-____
Page 1 of 2 1087306-4-
D
USA/Canada: 1-800-4KOHLER
(1-800-456-4537)
www.kohler.com
UNDERSCORE
Optional Accessories (cont.)
K-1705 Remote control N/A
K-9498 3(76 mm) whirlpool keypad trim CP Other_____
®
Technical Information
Fixture*: Bathing well: Basin area,
bottom Basin area, top 66(1676 mm) x 36(914 mm) Weight 110 lbs (49.9 kg) To overflow: Water depth 19(483 mm) Capacity 139 gal (526.2 L) * Approximate measurements for comparison only.
Drop-in cut-out 70-1/2(1791 mm) x 40-1/2(1029
No change in measurements if connected with drain illustrated. (K-7272)
45-3/4(1162 mm) x 32(813 mm)
mm)
Blower motor/control:
Heater V Hz A 300 W 220-240 50/60 3
Required Electrical Service
Dedicated circuit required, protected with Class A Ground-Fault Circuit-Interrupter (GFCI) or Residual Current Device (RCD):
Blower motor/control 220-240 V, 15 A, 50/60 Hz
Installation Notes
Install this product according to the installation guide.
Floor support under bath must provide for a minimum of 42 lbs/square foot (204 kg/square meter) loading.
Hot water supply should be 70% of capacity or greater. Installations will vary.
A blower motor/control access panel is required.
36" (914 mm)
21" (533 mm)
Blower Motor/ Control Access 34" (864 mm) W x 15" (381 mm) H Min
1"
42" (1067 mm)
(25 mm)
23" (584 mm)
4-1/8" (105 mm)
UNDERSCORE®6’ BUBBLEMASSAGETM BATH Page2of2
1087306-4-
D
1-1/2" (38 mm)
72" (1829 mm)
2-1/4" (57 mm)
1/2" (13 mm)
1-1/2" Bath Drain
Product Diagram
Loading...