HOURGLASS®32
Features
Acrylic
•
Integral apron
•
Integral tile flange
•
Left or right drain
•
Alcove installation
•
Textured bottom surface
•
60″ (1524 mm) x 32″ (813 mm) x 20″ (508 mm)
•
Codes/Standards Applicable
Specified model meets or exceeds the following:
CSA B45.5/IAPMO Z124
•
Specified Model
K-1219-LA
ALSO K-1219-RA
Colors/Finishes
0: White
•
Other: Refer to Price Book for additional colors/finishes
•
Accessories
CP: Polished Chrome
•
SH: Bright Silver
•
BATH
Model Description Colors/Finishes
K-1219-LA Bath with integral apron and integral tile flange – left-hand drain (shown) ❑ 0 ❑ Other_____
K-1219-RA Bath with integral apron and integral tile flange – right-hand drain ❑ 0 ❑ Other_____
Recommended Accessories
K-7161-AF Bath drain – for above or through-the-floor installation ❑ CP ❑ Other_____
Optional Accessories
K-1278 Removable apron ❑ 0 ❑ Other_____
K-1491 Removable pillow ❑ 0 ❑ Other_____
K-1601 Footstop ❑ 0 ❑ Other_____
Product Specification:
The acrylic bath shall with integral apron shall be 60″ (1524 mm) in length, 32″ (813 mm) in width, and 20″ (508 mm) in height.
Bath shall have a left or right drain. Bath shall feature an integral tile flange and textured bottom surface. Bath shall be for alcove
installations. Bath shall be Kohler Model K-1219-____-____.
Page 1 of 2
089399-4-
AE
USA/Canada: 1-800-4KOHLER
(1-800-456-4537)
www.kohler.com
HOURGLASS®32
Technical Information
Fixture*:
Bathing well:
Basin area, bottom 47″ (1194 mm) x 20″ (508 mm)
Basin area, top 53″ (1346 mm) x 23″ (584 mm)
Weight 80 lbs (36.3 kg)
To overflow
Water depth 14-1/2″ (368 mm)
Capacity 64 gal (242.3 L)
* Approximate measurements for comparison only.
Installation Notes
Install this product according to the installation guide.
Floor support under this product must provide for a minimum
of 48 lbs/square foot (234 kg/square meter) loading.
The hot water supply should be 70% of the capacity of the
bath or greater. Installations will vary.
Rim-mount faucet installations: Before drilling the mounting
holes, ensure the faucet does not interfere with the drain
overflow and circulating system.
Deck-mount spout installations: Consult local and national
codes for minimum air gap requirements.
16"
(406 mm)
1-11/16"
(43 mm)
1-1/4"
(32 mm)
3"
(76 mm)
1-1/2" OD
8-11/16"
(221 mm)
3"
(76 mm)
60" (1524 mm)
2-7/8"
1" (25 mm)
(73 mm)
No change in measurements if connected with drain
illustrated. (K-7161-AF)
1-1/4"
(32 mm)
32" (813 mm)
1/2"
(13 mm) R.
20"
(508 mm)
Integral Flange
Detail
HOURGLASS®32 BATH
Page2of2
089399-4-
AE
Product Diagram
Loading...