SUNWARD
®
Features
Acrylic
•
Oval shape
•
Drop-in
•
6 individually adjustable ProFlex
•
Pump with air switch and grounding-type plug-in cord
•
Molded lumbar supports and armrests
•
Optional K-1491 removable bath pillow
•
Optional K-1601 removable footstop
•
Optional K-9696 whirlpool trim kit in various finishes
•
60″ (1524 mm) x 42″ (1067 mm) x 21″ (533 mm)
•
hydro-massage jets
®
Codes/Standards Applicable
Specified model meets or exceeds the following:
ASME A112.19.7
•
UL 1795
•
ASTM E162
•
ASTM E662
•
CSA B45.5/IAPMO Z124
•
Specified Model
BATH WHIRLPOOL
K-1162
Colors/Finishes
0: White
•
Other: Refer to Price Book for additional colors/finishes
•
Accessories
0: White
•
CP: Polished Chrome
•
PB: Vibrant®Polished Brass
•
NA: None applicable
•
Other: Refer to Price Book for additional colors/finishes
•
Model Description Colors/Finishes
K-1162 Bath whirlpool – drop-in (shown) ❑ 0 ❑ Other_____
Recommended Accessories
K-11677 Swiftflo
Optional Accessories
K-576 Undermount kit ❑ NA
K-1491 Pillow ❑ 0 ❑ Other_____
K-1601 Footstop ❑ 0 ❑ Other_____
K-9696 Jet trim kit (metal finishes) ❑ 0 ❑ CP ❑ Other_____
TM adjustable trip lever drain ❑ CP ❑ PB
Product Specification
The drop-in oval shaped bath whirlpool shall be made of acrylic. Bath whirlpool shall be 60” (1524 mm) in length, 42” (1067 mm)
in width, and 21” (533 mm) in height. Bath whirlpool shall have 6 individually adjustable ProFlex hydro-massage jets, a pump
with air switch and grounding type plug-in cord. Bath whirlpool shall have molded lumbar supports and armrests. Bath whirlpool
shall be Kohler Model K-1162-_______.
Page 1 of 2
1041933-4-
E
USA/Canada: 1-800-4KOHLER
(1-800-456-4537)
www.kohler.com
SUNWARD
®
Technical Information
Required Electrical Service
Fixture*:
Bathing well:
Basin area,
bottom
Basin area, top 53-1/2″ (1359 mm) x 32-1/8″ (816 mm)
Weight 110 lbs (50 kg)
To overflow:
Water depth 15″ (381 mm)
Capacity 57 gal (215.9 L)
* Approximate measurements for comparison only.
Pump: V Hz A
1-speed 120 60 7.5
Minimum access panel pump/control:
20″ (508 mm) W x 15″ (381 mm) H required
Included components:
Cut-out template 1042556-7
43″ (1092 mm) x 21-9/16″ (548 mm)
4-5/8" (117 mm)
Dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI):
Pump/control 120 V, 15 A, 60 Hz
Locate the outlet behind the whirlpool and within 24”
(610 mm) of the pump.
Installation Notes
Install this product according to the installation guide.
Floor support under whirlpool must provide for a minimum of
35 lbs/square foot (171 kg/square meter) loading.
The suction line extends 4-5/8″ (117 mm) beyond the edge of
the rim. The pump base extends 1/8″ (3 mm) beyond the
edge of the rim. Modify the framing as needed.
Recommended faucet area
21"
(533 mm)
3-1/8"
(79 mm)
10-13/16"
(275 mm)
60" (1524 mm)
3-1/2"
(89 mm)
2-7/8"
3" (76 mm)
SUNWARD®BATH WHIRLPOOL
Page2of2
1041933-4-
E
(73 mm)
3/8" (10 mm)
Product Diagram
Pump/ControlAccess
21"
(533 mm)
19-1/2"
(495 mm)
1-1/2"
(38 mm)
Drop-In Rim Detail
42" (1067 mm)
1-1/2" OD
Loading...