ARCHERTM
Features
Acrylic
•
8 color-matched jets
•
Pump with air switch and grounding-type plug-in cord
•
In-line heater
•
Slotted overflow for maximum bathing depth
•
Low threshold height
•
Integral lumbar support
•
Armrests
•
72″ (182.9 cm) x 36″ (91.4 cm) x 19″ (48.3 cm)
•
Codes/Standards Applicable
Specified model meets or exceeds the following:
ADA
•
ANSI Z124.1.2
•
ASME A112.19.7M
•
UL 1795
•
Specified Model
6’ (1.8 m) BATH WHIRLPOOL WITH
HEATER
K-1124-H
Colors/Finishes
0: White
•
Other: Refer to Price Book for additional colors/finishes
•
Accessories
0: White
•
CP: Polished Chrome
•
Other: Refer to Price Book for additional colors/finishes
•
Model Description Colors/Finishes
K-1124-H Drop-in bath whirlpool with heater ❑ 0 ❑ Other_____
Required Accessories
K-7272 Bath drain – above or through-the-floor installation ❑ CP ❑ Other_____
Optional Accessories
K-9529 Removable bath seat ❑ 0
Product Specification
The acrylic bath whirlpool shall be 72″ (182.9 cm) in length, 36″ (91.4 cm) in width, and 19″ (48.3 cm) in height. Product shall
have 8 color-matched jets and armrests. Product shall feature a pump with air switch and grounding-type plug-in cord. Product
shall have an in-line heater. Product shall feature a slotted overflow for maximum bathing depth, low threshold height, and
integral lumbar support. Bath whirlpool shall be Kohler Model K-1124-H-______.
Page 1 of 2
1071365-4-
USA: 1-800-4-KOHLER
D
Canada: 1-800-964-5590
kohler.com
ARCHERTM
Technical Information
Fixture*:
Bathing well
Basin area, bottom 51-3/8″ (130.5 cm) x 21″ (53.3 cm)
Basin area, top 64-1/2″ (163.8 cm) x 30-1/2″
(77.5 cm)
Weight 110 lbs (50 kg)
To overflow
Water depth 15″ (38.1 cm)
Capacity 72 gal (273 L)
* Approximate measurements for comparison only.
Drop-in cutout dimensions:
70-1/2″ (179.1 cm) x 34-1/2″ (87.6 cm)
Pump: V Hz A
1-speed 120 60 7
Heater: kW V Hz A
1.5 120 60 12.5
Pump is supplied with 24” (61 cm) grounding-type plug-in
cord.
Minimum access panel pump/control:
20″ (50.8 cm) W x 15″ (38.1 cm) H required
Required Electrical Service
(2 required)
Two dedicated circuits required, each protected with
Class A Ground-Fault Circuit-Interrupter (GFCI):
Pump/control 120 V, 15 A, 60 Hz
Heater 120 V, 15 A, 60 Hz
Installation Notes
Install this product according to the installation guide.
Floor support under this product must provide for a minimum
of 41 lbs/square foot (201 kg/square meter) loading.
This product is designed for drop-in installation only. It is not
intended for use in a three-wall alcove with an overhead
shower.
The hot water supply should be 70% of the capacity of the
bath or greater. Installations will vary.
No change in measurements if connected
with drain illustrated. (K-7272)
18"
(45.7 cm)
1-1/4"
(3.2 cm)
2-1/2"
(6.4 cm)
1-1/2" OD
11-1/4"
(28.6 cm)
72" (182.9 cm)
3/4" (1.9 cm)
Product Diagram
1-1/2"
(3.8 cm)
Drop-in Rim
Detail
Pump/Control Access
36" (91.4 cm)
19"
(48.3 cm)
ARCHERTM 6’ (1.8 m) BATH WHIRLPOOL WITH HEATER
Page2of2
1071365-4-
D
Loading...