Kohler K709W User Manual

VINTAGE

FEATURES

•

72” (182.9cm) x 42” (106.7cm) x 21-3/16” (53.8cm) (drop-in)

•

72” (182.9cm) x 42” (106.7cm) x 24” (61cm) (freestanding with base)

•

Cast iron with Safeguard finish

•

Installed as drop-in or free-standing unit

CODES/STANDARDS APPLICABLE

Specified model meets or exceeds the following:

•

ASME/ANSI A112.19.1M

•

IAPMO/UPC

•

Canadian Standards Association (CSA)

•

State of Massachusetts

COLORS/FINISHES

• 0 White

• Other Refer to Fixtures Price Book for additional colors

Accessories:

• CP Polished Chrome

• PB Polished Brass

• WA Natural Ash

• WB Golden Oak

• WC Dark Walnut

• Other Refer to Faucets Price Book for additional finishes

• NA None Applicable

SPECIFIED MODEL:

Model Description Colors/Finishe s

K-700 Drop-in or free-standiing bath

0 White Other______

BATH

K-700

Required Accesso ries

K-1172 Adjustable feet (for free-standing bath) K-705 Wood base (for free-s tanding bath) OR K-709 Ceramic base (for free-st anding bath)

Recommended Accesso ries

K-7158 Vintage drain for drop-in OR K-7159 Vintage drain for free-standing

WA WB WC 0 White Other______

CP PB Other______ CP PB Other______

NA

PRODUCT SPECIFICATION:

The bath shall be 72” (182.9cm) in length, 42” (106.7cm) in width, and 21-3/16” (53.8cm) in height (drop-in) or 72” (182.9cm) in length, 42” (106.7cm) in width, and 24” (61cm) in height (free-standing). Bath shall be made of cast iron with Safeguard finish. Bath shall be installed as drop-in or free-standing unit. Bath shall be Kohler Model K-700-_______.

We reserve the right to make revisions without notice in the design of fixtures or in packaging unless this right has specific ally been waived at the tim e the order is accept ed.

Page 1 of 2 106541-4-BB



VINTAGE

PRODUCT INFORMATION

Fixture*: basin area top area weight Bathing

well

To overflow 15” (38.1cm) 82 gal. (310.4L) * Approximate measurements for comparison only. Included Components: Cutout template 106594-7

INSTALLATION NOTES

NOTICE: Unless otherwise specified, floor support under bath

must provide for a minimum of 80 lbs./square foot (390 Kg./square meter) loading.

Roughing-In Notes

No change in measurements if connected with drain illustrated.

44” (111.8cm) x 24” (61cm)

water depth capacity

60” (152.4cm) x 32” (81.3cm)

485 lbs. (220kg)

69” (175.3cm)

19” R. (48.3cm)

CUTOUT DETAIL

1.25>132

40” (101.6cm)

3-3/4” (9.5cm)

42” (106.7cm)

3” (7.6cm)

4” (10.2cm)

2-3/8” (6cm)

21-3/16” (53.8cm)

1-1/2” O.D.

PUMP

13-1/4” (33.7cm)

36” (91.4cm)

PUMP/CONTROL ACCESS

18-1/4” (46.4cm)

1-1/8” (2.9cm)

10-3/4” (27.3cm)

4” (10.2cm)

72” (182.9cm)

K-700 Vintage   Bath

Page 2 of 2 106541-4-BB

PRODUCT DIAGRAM