Kohler K6228C11CP Specifications
Roughing-In
K-6228
KARBON
WALL-MOUNT KITCHEN SINK FAUCET
®
Product Information
Applicable product:
Wall-mount kitchen sink faucet with
silver tube
Wall-mount kitchen sink faucet with
black tube
Wall-mount kitchen sink faucet with gold
tube
Wall-mount kitchen sink faucet with
bronze tube
Lever handle is ADA compliant.
Optional accessories:
Shallow roughing-in valve body kit 1107026
Deep roughing-in valve body kit 1107027
Low flow kit – reduces maximum flow to
1.5 gpm (5.7 lpm) at 60 psi (4.1 bar)
High flow kit – increases maximum flow
to 2.2 gpm (8.3 lpm) at 60 psi (4.1 bar)
K-6228-C11
K-6228-C12
K-6228-C13
K-6228-C15
1151265
1151266
Installation Notes
Install this product according to the installation guide.
ADA compliant when installed to the specific requirement of
the regulation.
WARNING: Risk of property damage. For
exterior wall installations, ensure proper wall
insulation to prevent frozen pipes.
NOTICE: Do not locate the faucet in close proximity to a
direct heat source or use the faucet as a pot filler. Exposure
to excessive heat will damage the integral sprayhead and
spout joints and may cause severe discoloration to the carbon
fiber tubing.
Special framing and support considerations are required to
mount the wall-mount valve.
WARNING: Risk of property damage. Before
finishing the wall, ensure the supply lines are
connected to the mixer valve with the cold supply
line plumbed on the left and the hot supply line
plumbed on the right. Doing so will avoid replacing
the finished wall due to error.
One 2-3/16″ (56 mm) diameter cutout hole is required for the
valve. One 1-3/16″ (30 mm) diameter cutout hole is required
for the spout.
2-1/16"
(52 mm)
Ø 1-1/16"
(27 mm)
Ø 2-5/8"
(67 mm)
Ø 2-5/8"
(67 mm)
COLD
4-1/8"
(105 mm)
6" (152 mm)
11-1/16" (281 mm)
Ø 2-1/8" (54 mm)
5/8"
(16 mm)
4-1/8"
(105 mm)
1-7/16"
(37 mm)
2-7/8"
(73 mm)
Finished Wall Thickness
Thin Wall
Standard Wall
Thick Wall
13-1/4" (337 mm) Max
4"
(102 mm)
0"- 5/8" (16 mm)
*
1/2" (13 mm) - 1-1/8" (29 mm)
1" (25 mm) - 1-5/8" (41 mm)
2-7/8"
(73 mm)
*
1-7/8"
(48 mm)
4-5/16"
(110 mm)
1-7/16"
(37 mm)
3-1/4"
(83 mm)
Finished Wall
KARBON®WALL-MOUNT KITCHEN SINK FAUCET
1095311-1-
F
Loading...