Kohler K1229LA96 User Manual

MARIPOSATM
Features
Acrylic
Left or right drain
Integral apron
Integral apron/flange
66(167.6 cm) x 36(91.4 cm) x 20(50.8 cm)
Codes/Standards Applicable
ANSI Z124.1.2
ASTM E162
ASTM E662
Colors/Finishes
0: White
Other: Refer to Price Book for additional colors/finishes
Accessories
CP: Polished Chrome
PB: Vibrant®Polished Brass
Other: Refer to Price Book for additional colors/finishes
Specified Model
For complete faucet, both faucet trim and Rite-Temp valve must be specified.
5.5’ ACRYLIC BATH
K-1229
Model Description Colors/Finishes
K-1229-LA Bath with left outlet, integral apron (shown) 0 White Other_____ K-1229-RA Bath with right outlet, integral apron 0 White Other_____
Recommended Accessories
K-7161-AF Drain CP PB Other_____
Product Specification
The bath shall be 66(167.6 cm) in length, 36(91.4 cm) in width, and 20(50.8 cm) in height. Bath shall be made of acrylic. Bath shall have a right or left outlet. Bath shall have an integral apron. Bath shall be Kohler Model K-1229-___-____.
Page 1 of 2 1038382-4-
B
USA/Canada: 1-800-4KOHLER
(1-800-456-4537)
www.kohler.com
MARIPOSATM
Technical Information
Fixture:* basin area top area weight Bathing
well
To overflow
* Approximate measurements for comparison only.
48(121.9 cm) x24″ (61 cm)
water depth capacity 14(35.6 cm) 67 gal. (254 L)
59(149.9 cm) x30″ (76.2 cm)
65 lbs. (30 kg)
Installation Notes
Install this product according to the installation guide. NOTE: Unless otherwise specified, floor support under bath
must provide for a minimum of 39 lbs/square foot (193 kg/square meter) loading.
If installing a rim mount faucet, make sure any plumbing does not interfere with the drain overflow and circulating system before drilling any holes. Consult local and national codes for minimum air gap requirements if installing a spout on the faucet deck.
No change in measurements with drain shown. (K-7161-AF or K-7161M-AF)
Recommended faucet area.
18" (45.7 cm)
1-11/16" (4.3 cm)
8-11/16" (22.1 cm)
66" (167.6 cm)
3-1/2" (8.9 cm)
3" (7.6 cm)
MARIPOSATM 5.5’ ACRYLIC BATH Page2of2
1038382-4-
B
1" (2.5 cm)
2-7/8" (7.3 cm)
20" (50.8 cm)
1-1/2" OD
Product Diagram
36" (91.4 cm)
1-1/4" (3.2 cm)
1/2" (1.3 cm) R. Max.
Integral
Flange Detail
Loading...